1 / 2
Davinci 1.0/1.0A Swivel Mount Toolhead/X Carriage V6 - Air — image 1
1 / 2

Davinci 1.0/1.0A Swivel Mount Toolhead/X Carriage V6 - Air

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Carriage for XYZPrinting Davinci 1.0 that adds bltouch and layer cooling with a V6 hotend. (Bowden)

Rating
0 / 5
Likes
8
Downloads
58
Makes
1
Views
501
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

PLEASE BE ADVISED I HAVE (mostly) ABANDONED MY DAVINCI. Use at your own risk… BUT it should work if printed to size. (Tune shrinkage in your slicer)

Some X/Y travel will be lost :( — the price of luxury here… 

This is an old design I made for a friend. I tested the water-cooled version of this design myself with great success.  Although I never wanted to print and test this one… maybe someday (still have it but not using at all).

Please see plate for printing orientation or you could just YEET it at your printer with the plate file fits in 180x180 without skirt.

o(o.0)o

and then the m0nkee disappeared…

Tags