Cooling fan mount for DaVinci, 120mm & 140mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This duct allows you to mount either a 120mm or 140mm fan into the handle holes on the side of XYZPrinting Da Vinci…
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 162
- Wydruki
- 2
- Wyświetlenia
- 1356
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This duct allows you to mount either a 120mm or 140mm fan into the handle holes on the side of XYZPrinting Da Vinci 1.0/1.0A/2.0/Pro/AIO/etc. printers. This works great for cooling PLA prints during printing, or for expediting the cooling process at the end of an ABS print. Print two, and use one side as intake, and one side as exhaust.
It does fit in the print volume of a DaVinci 1.0A printer (the one I have).
Print instructions
Category: 3D Printer Accessories Summary
This duct allows you to mount either a 120mm or 140mm fan into the handle holes on the side of XYZPrinting Da Vinci 1.0/1.0A/2.0/Pro/AIO/etc. printers. This works great for cooling PLA prints during printing, or for expediting the cooling process at the end of an ABS print. Print two, and use one side as intake, and one side as exhaust.
It does fit in the print volume of a DaVinci 1.0A printer (the one I have).
Print Settings
Printer:
DaVinci 1.0A
Rafts:
No
</div>Supports:No
Resolution:
0.2
</div>Infill:100%
Notes:
Print it in the orientation it loads (with the fan mounting flange down, against the print bed).
To install it, make a hole in the left and right sides of the printer-side mount, and use a screw or ziptie to secure it.