Davinci E3Dv6 Layer Cooling Fan Duct! (Must Have)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a must-have if you convert your DaVinci 1.0 printer to the e3dv6 and plan to use the original fan header.…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 412
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a must-have if you convert your DaVinci 1.0 printer to the e3dv6 and plan to use the original fan header. (make sure the fan is enabled in the repetier configuration)
If you're like me and you converted your Davinci to an e3dv6 then realized there is no way to add a part cooling fan don't worry im here to save the day with this sleek and effective 40mm fan mount and duct!
Recomended fan: https://www.amazon.com/gp/product/B071FNHVXN/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
This fan duct is designed to squeeze between the Belt and the extruder carriage Perfectly without rubbing be sure to check fitment before printing.
After installation you now have a printer with an enclosure and layer cooling so you can print just about any filament. Good Luck and Please post your make if you actually use this I put way too much time into the design lol!
Print Settings
Printer:
Davinci 1.0
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2
Infill:
10
Filament:
Makerbot ABS
White
Notes:
Print in Default Orientation and Set supports to only generate when they are touching the bed!
Category: 3D Printer Parts