MX Mechanical Key Cap (Keycap)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low profile keycap for a 1U key on the Logitech MX Mechanical Keyboard
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 182
- Wydruki
- 2
- Wyświetlenia
- 880
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Quick remix of the model by nullpointer.
I wanted to take advantage of the excellent ironing feature to give a smooth finish. To do this, I wanted to print the other way up. This posed some issues, as the stem is longer than the side walls of the keycap. Also, the stem didn't have a very firm grip on the switch, and I was concerned it would break.
This model aligns the stem and the bottom walls of the keycap to enable printing upright. Also, I added a perimeter around the MX switch stem to ensure it has a good grip on the switch.
I used Bambu Matte Blue PLA - if you want the LED to shine through, use transparent filament.
Print Settings
- Layer height is up to you, I used 0.08mm
- Avoid crossing walls
- No supports
- No brim
- Arachne walls (this avoids the use of infill in the sides, instead it thickens the walls of the print - this speeds up print time and increases accuracy and strength).
I tried to include a gcode file, but Printables takes issue with some of the settings provided by Bambu Studio.