V-Core 3 rear Z arm 5x Wago 221-412 & drag chain mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to mount 5x Wago 221-412 for the bed straight on the stock rear Z arm and provides a cable chain mount.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 106
- Wydruki
- 2
- Wyświetlenia
- 1157
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
TLDR; UNPLUG YOUR PRINTER BEFORE DOING ANYTHING ON MAINS VOLTAGE. OTHERWISE THERE IS A 50% CHANCE YOU WILL GET SHOCKED.
- Even if your printer is switched off, it only may have switched neutral which means you still have a hot phase even if DC-powered items like the printer board or RPI are definitely off. You never know without measuring if it is safe to work on mains powered stuff in your printer and it is way faster to pull the power cord instead of measuring using e.g. a DUSPOL.
The wago mounts are based on the Voron V2 / 2020 mounts by Boingomw which you can find at https://github.com/boingomw/VoronUsers/tree/master/printer_mods/Boingomw/Wago_mount
The drag chain mount is based on the one by jouz which you can find at https://www.thingiverse.com/thing:4961003
Notes and required items
The drag chain mount holes are M3 heat inserts, same for the holes to mount the wago holder on the drag chain mount.
The drag chain holes are matching a IGUS 05.10.038.0 chain with connection set 050.10.12.A1. You will need to modify this for different drag chains.
- 4x M3 Brass heatstake inserts - short M3x5x4
- 2x M3x6 BHCS screws to mount the wago holder onto the drag chain mount. Don't need to be black or fancy because they will be hidden anyway
Print instructions
Both wago and drag chain mount are designed fit exactly on the arm. It won't fit Ventermechs or maybe other modifications you may have done. Please print in ABS to make sure it will withstand the heat of the bed. PETG may be sufficient but that is something you don't want to try. The Wago clamps are rated for 85°C environment temperature and 105°C permanent usage temperature so these won't fail. Print without supports and you won't need much infill.