1 / 1
Gridfinity Refined 1u 9x Pinecil Tip Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity Refined version with lip removed and much looser holes. Added Pine64 Logo for flair.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked the 9 tip holder, but found the tolerances were too tight, making it hard to get the tips removed, especially with one hand. So I rebuilt it in Fusion with the Gridfinity Refined base design and loosened up the tolerances. I also removed the top bin lip, as it wasn't functional if the bin had any contents, and it made it harder to grab the tips at the base.
The pictured bin was printed in Inland Translucent Grey PETG+ with 0.3mm layer height and 50% Lightning Infill.