1 / 1
Prusa XL / IKEA Trotten magnetic steel sheet holder — zdjęcie 1

Prusa XL / IKEA Trotten magnetic steel sheet holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Vertical steel sheet holder for Trotten shelf (should also work with MK4 sheets).

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
183
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Public Domain

This uses 8 x 3mm cylindrical magnets (glued in). I found putting 2 magnets in the lower end and another at the top is sufficient (i.e. 6 total), but there are holes to add more. Holds 3 XL steel sheets. I designed it to stick out a bit above the worktop for better access. The magnets also reduce rattling of the sheets.
Standard print settings (PETG, 0.2mm or better). Enable supports to get a bit better definition on the little tab (not strictly necessary).

Tagi