Liczymy pasujące modele…
These are designed to allow for simple cable management within the beam running across the desk. The pocketing grants less material usage, ability to pull cables through as well as squeezing thin plugs through. Two of these have the…
Desk Corner Hook (IKEA Desk – Existing Screw Mount) This hook is a remix of the original IKEA desk hook, redesigned to mount neatly to the corner of the desk using existing screws for a clean, secure installation with no drilling…
A simple desk hanger specifically made for the ikea desk trotten
Headphone holder for Ikea Trotten table Max Headband Width = 50mm
Cable holder 18mm height, fits a IKEA TROTTEN Desk. Accomodate 7 or more USB (or other small) cables. Fits the IKEA TROTTEN Desk which has a 18 mm height, mounted it with double sided adhesive tape. Kudos to StefanoSchito_455313 for the…
This headphone holder is designed for the IKEA TROTTEN, but only for the fixed version, not the height adjustable. It fits in between the legs and it hides below the table top but still leaves them within reach. Its easy to install but…
These are designed to allow for simple cable management within the beam running across the desk. The pocketing grants less material usage, ability to pull cables through as well as squeezing thin plugs through. Two of these have the…
This uses 8 x 3mm cylindrical magnets (glued in). I found putting 2 magnets in the lower end and another at the top is sufficient (i.e. 6 total), but there are holes to add more. Holds 3 XL steel sheets. I designed it to stick out a bit…
Duplicate the STL with a symetry. Print flat and then glue the two parts together (with CA glue).
Clip two of these over your 2020 extrusion or 20x20 square cross section, then attach to the holder with screws. You can use M3x6 or M3x8 screws like with the original, the screw heads will sit flush in the clip. If you want a beefier…
Simple headphones holder for Trotten 140/160 table. Tested with Bose QuietComfort 2023, should be compatible with most of other headphones. Print STL as oriented. I'm using 0.4mm line, 3 perimeters, 5 top, 4 bottom, 15% infill, works fine…
These modular 3D-printed mounts are designed to organize cables and power strips under your IKEA TROTTEN desk. Originally created for a personal workspace upgrade, they help keep wires tidy, secure, and out of sight — perfect for clean…
!!! DISCLAIMER FOLLOW THE INSTRUCTIONS !!! You can Print Baseplates for one whole TROTTEN on just 3 Build plates I configured this on my P1S. I will also provide the .stl for the individual Parts Instructions: Download the .3mf File and…
IKEA TROTTEN Desk Frame Hook This is a custom hook designed specifically for the IKEA TROTTEN desk frame , allowing you to easily hang headphones, bags, cables, or other accessories without drilling or modifying your desk. The hook mounts…
Desk Corner Hook (IKEA Desk – Existing Screw Mount) This hook is a remix of the original IKEA desk hook, redesigned to mount neatly to the corner of the desk using existing screws for a clean, secure installation with no drilling…
A simple desk hanger specifically made for the ikea desk trotten
Headphone holder for Ikea Trotten table Max Headband Width = 50mm
I was changing the IKEA desk top and saw how scratched the feet are. If the feet are scratched, the floor probably gets damaged as well. So I decided to print some foot covers. Printed in TPU. Just push it into the feet, and it should…
Simple hook that allows to hang backpack or bag under the desk, in hands reach. I suggest printing it with supports on build plate, in orientation shown on a screenshot.Mine is printed this way in PLA and it works so far, even with heavy…
Corner bumper for the IKEA Trotten (and possibly Skarsta) desk series to protect the edge wall sensor of robot vacuum cleaners. At my current feet height the top edge of the feet can dig into cutout of the wall sensor. Unlucky combination…
Pushing the desk can easily move it on smooth floors, so I made this spacer to keep exactly 10cm distance between feet and wall. Cutaway version in case cables need to be routed
Required Hardware 6mm Hex Bit 2x 200mm ¼" Magnetic Bit Holder (e.g. HMMüllner Magnethalter 1/4" - 200mm ) 2x Z809 Bearing Print one adapter and two inserts. Mount one side with existing M6 screws and add double sided tape on the bottom…
Simple corner protection for Ikea Trotten table. Mostly use for kids protection. It fits good. If not just use a small piece of paper. It is not completely rounded. PLA 0.20mm (0.25 draft also good) printed as you can see in .gcode file
This is an additional hook to be mounted on an IKEA Trotten desk (the fixed version, not the height adjustable). It's made to be placed on the side, between the legs of the desk, using the two big sleeve screws from underneath. The design…
This is a roller which friction fits to back of standing desk top. It is intended to prevent damage to the wall or the desktop from desktop grinding on wall. Also allows room for cable to pass from underneath (pushes desk off of wall by…
3 accessories for the IKEA Trotten desk: connector for multiple tables (the part with ridges) side skirt (in case you want to cover a cut Trotten, like I did) height adjustment feet in various sizes, matching the angle of the Trotten…
The bracket wraps around an Ikea Trotten table metal frame. You need to locate the existing holes on the inside of the top frame beams, and drill a hole on the other side of the profile so that an M5 bolt can go through. Requires: 2no…
simple clip for Ikea Trotten desk Category: Organization
Zgubiłem łącznik ramy biurka Trotten z Ikea, ale od czego jest drukarka :)
The extension plug holder clip requires M6 panhead bolt. Wire/cable holder just rotates and snaps in place.
I bought some IKEA TROTTEN Desks and some ALEX 36x70cm Drawer Elements thinking they would fit together, but it turns out there is about 2cm difference between the bottom steel element of the Desk and the top surface of the drawers. So i…
Since two of mine handles wore out i designed this replacement. Designed more for looks as it also wears out quite quickly (at least in PLA which i tested). To install simply push onto the same rod the original was. Prints without…
Say goodbye to your IKEA Trotten desk woes with this newly designed crank handle! Engineered with precision and a dash of love, this handle is the perfect solution for those pesky broken cranks. No more struggling with a faulty handle -…
Since I have my Prusa XL in a trotten and want to use an enclosure made of a "hat" and a "front I designed standoffs for the IKEA Trotten. I printed them in PLA, but other Materials should work too. You will one additional M4 or M5 Screw…
Toolholder 4 trotten. Designed in Freecad and I printed in PETG. Presliced with PLA Supportinterface for Prusa XL. Tool holes need to be custom designed or made with Infill Modifiers.
Trotten is great for the XL, but you cannot load the lower spool holders because the crossbar is in the way. One solution would be to move all spools to one side, but I opted to hang them on the shelf instead. This clears enough space for…
Filament Holder for PRUSA MMU and IKEA TROTTEN Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 15 Filament: 3DJAKE PETG Category: 3D Printer Accessories
Para el modelo TROTTEN de IKEA. Se sujeta a una de las paran de forma que no es necesario atornillar a la madera.
A headphone holder that fits an Ikea Trotten table snugly (~2.2cm width).
Trotten works perfectly with the XL and the official enclosure. You can use my spool holders ( https://www.printables.com/model/733326-prusa-xl-spool-holder-for-ikea-trotten-or-2020-ext ), see the description there (bottom line: you have…
