1 / 2
iFixit Mako Pegboard Holder (remix for 2020 or IKEA Trotten)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small remix to attach Mako holder to a Trotten shelf or 2020 extrusion.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Clip two of these over your 2020 extrusion or 20x20 square cross section, then attach to the holder with screws. You can use M3x6 or M3x8 screws like with the original, the screw heads will sit flush in the clip. If you want a beefier clip and/or use longer screws, simply scale the model along Z in the slicer.