1 / 1
Gridfinity TROTTEN Base Stacked | Bambu Printers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity Base Stacked Print with PETG as interface Material for Ikea TROTTEN.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v3.0
!!! DISCLAIMER FOLLOW THE INSTRUCTIONS !!!
You can Print Baseplates for one whole TROTTEN on just 3 Build plates
I configured this on my P1S.
I will also provide the .stl for the individual Parts
Instructions:
- Download the .3mf File and Open in Bambu Studio
- Check if the Filaments are selected correctly
- Make sure that the Bed Temperature is the same for PLA and PETG (especially if you use a different build Plate as this is configured for Textured build Plate. ) If they are different change the PETGs Bed Temp to the one used on the PLA.
- Check if the Supports and Supportmaterials are configured correctly like so:
- Slice the Project and check if the interfacing Materials are applied correctly
This Project was created using this Youtube Video (i recommend watching it):