1 / 1
Gridfinity TROTTEN Base Stacked | Bambu Printers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity Base Stacked Print with PETG as interface Material for Ikea TROTTEN.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 0
- Views
- 315
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- GNU General Public License v3.0
!!! DISCLAIMER FOLLOW THE INSTRUCTIONS !!!
You can Print Baseplates for one whole TROTTEN on just 3 Build plates
I configured this on my P1S.
I will also provide the .stl for the individual Parts
Instructions:
- Download the .3mf File and Open in Bambu Studio
- Check if the Filaments are selected correctly
- Make sure that the Bed Temperature is the same for PLA and PETG (especially if you use a different build Plate as this is configured for Textured build Plate. ) If they are different change the PETGs Bed Temp to the one used on the PLA.
- Check if the Supports and Supportmaterials are configured correctly like so:
- Slice the Project and check if the interfacing Materials are applied correctly
This Project was created using this Youtube Video (i recommend watching it):