IKEA Trotten feet bumper for cleaning robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corner bumper to avoid the upper edge scraping into the wall sensor of cleaning robots
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 500
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Corner bumper for the IKEA Trotten (and possibly Skarsta) desk series to protect the edge wall sensor of robot vacuum cleaners.
At my current feet height the top edge of the feet can dig into cutout of the wall sensor. Unlucky combination I guess.
This accessory attaches to the underside of the feet, allowing the lower part of the bumper to function as expected.
The attachment relies on a shim which is placed in-between the bottom screw and the bumper.
Cut any piece of thick paper or thin cardboard and stack until the bumper feels solidly in-place. Measure the required thickness, then scale the included shim to the required Z height for a perfect finish.
Or just cut the piece of cardboard itself. Due to the shape of the bumper, it won't be visible unless looking directly underneath.