IKEA Trotten standoffs for higher clearance above the Prusa XL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IKEA Trotten standoffs for higher clearance using M4 or M5 screws that are at least 20mm long, a washer and a nut.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 353
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Since I have my Prusa XL in a trotten and want to use an enclosure made of a "hat" and a "front I designed standoffs for the IKEA Trotten. I printed them in PLA, but other Materials should work too. You will one additional M4 or M5 Screw that is at least 20mm long, a washer and a nut. Also the 4 initial Screws from the Trotten are used.
I suggest to print with at least 4 Perimeteres with a 0.6 nozzle or 6 Perimeters with a 0.4 Nozzle.
The Model is not made to put heavy stuff on top. I will just store my enclosure on top and it should easily hold up to 20 Kilogramm.