IKEA Trotten standoffs for higher clearance above the Prusa XL
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
IKEA Trotten standoffs for higher clearance using M4 or M5 screws that are at least 20mm long, a washer and a nut.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 353
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Since I have my Prusa XL in a trotten and want to use an enclosure made of a "hat" and a "front I designed standoffs for the IKEA Trotten. I printed them in PLA, but other Materials should work too. You will one additional M4 or M5 Screw that is at least 20mm long, a washer and a nut. Also the 4 initial Screws from the Trotten are used.
I suggest to print with at least 4 Perimeteres with a 0.6 nozzle or 6 Perimeters with a 0.4 Nozzle.
The Model is not made to put heavy stuff on top. I will just store my enclosure on top and it should easily hold up to 20 Kilogramm.