[Option 3 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip with TETHER to TUBE feature
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prints in TPU. Easier to use (more to grab) plus won't fly off & get lost, because it tethers to the PTFE tube!
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 250
- Wydruki
- 1
- Wyświetlenia
- 1664
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. Kudos & thanks to Vance Howard for the suggestion.
OPTION 3 of 3 — TETHER to TUBE edition — Prints in TPU. Easier to use (more to grab) plus won't fly off & get lost, because it tethers to the PTFE tube.
TPU. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle. Enjoy.
- - - - - - - -
I used digital calipers to measure and recreate the C-Clip used on both sides of the runout sensor on the Flashforge AD5M because one of mine got sucked into a clip-eating black hole.
Then I went above and beyond and made two more options for it. Speaking of the other two options… see below.

- The 1st option is a clone of the stock factory clip - CLICK HERE.
- The 2nd option is this one with the extended handle - CLICK HERE.
- The 3rd option is a TPU print that tethers to the PTFE tube - THIS LISTING.