[Option 3 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip with TETHER to TUBE feature
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prints in TPU. Easier to use (more to grab) plus won't fly off & get lost, because it tethers to the PTFE tube!
- Rating
- 5 / 5
- Likes
- 72
- Downloads
- 250
- Makes
- 1
- Views
- 1,660
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. Kudos & thanks to Vance Howard for the suggestion.
OPTION 3 of 3 — TETHER to TUBE edition — Prints in TPU. Easier to use (more to grab) plus won't fly off & get lost, because it tethers to the PTFE tube.
TPU. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle. Enjoy.
- - - - - - - -
I used digital calipers to measure and recreate the C-Clip used on both sides of the runout sensor on the Flashforge AD5M because one of mine got sucked into a clip-eating black hole.
Then I went above and beyond and made two more options for it. Speaking of the other two options… see below.

- The 1st option is a clone of the stock factory clip - CLICK HERE.
- The 2nd option is this one with the extended handle - CLICK HERE.
- The 3rd option is a TPU print that tethers to the PTFE tube - THIS LISTING.