Workbench bucket/trash can for Festool MFT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bucket or trash can for your workbench!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a bucket or trash can for your workbench!
Just put your trash or sweep your saw dust into it and when it is full you can easily take it out of the holder and empty it.
You can attach the bucket with or without the dust ramp/dust cover, depending on which workbench you want to attach it to.
The bucket needs som support either on the inside or outside lip depending of how you print it. The rest of the models should be printable (HA!) without support.
I would recommend to use atleast 3 walls for printing. I also added a dust ramp model file with the part splitted in half to make it more easy to print.
Have Fun!