Liczymy pasujące modele…
Box for used batteries 9V battery style Dimensions : 91x60mm, height 160mm Need 4 magnets diam.4 x 2mm Case: Layer height 0.2mm Infill 15% Model color Black then Copper Color change at 105mm Pause at 151.6mm to place the 2 magnets (4x2mm)…
This can be used to stop your trashcan from moving back when you go to open it.
This is a trashcan you can mount to a vertical surface and easily remove if you need to! I made this so I can have a small trashcan under my desk, mounted to a sidewall of my drawer cabinet. The holes for the screws are 4mm in diameter so…
Suzuki Logo eingefügt REMIX VON https://www.printables.com/model/500969-suzuki-vitara-2015-cupholder-trash-can
Have you ever wanted a trash can that actually looks like a trash can? Well now you can, with trashCan²! Great for offices, workshops, bathrooms, bedrooms, kitchens, makerspaces, you name it! Scale it to your heart’s content. As long as…
Holds back garnishes and other stuff, while letting liquid passthrough with ease. It even have a lip on the inside to make sure the droplets go directly into the waste and doesn't spill everywhere. Originally made for rectangular trashcan…
Throwing your recyclables into the same trash can in your office because you are too lazy to take them elsewhere? Fear no longer! This is a simple basket insert for a trashcan that allows you to separate your recyclables. Suitable for…
Great for keeping next to a printer to both store SD adapter for Micro SD cards and USB sticks, and for collecting filament poops.
your new trash bin. scale it up do what you want you can even make it your new home.
I decide to design this helper because our brand new kitchen only has only 3 trashcans with 15 liters of capacity each. Instead of the three 15 liters trashcans (Blanco 229330) we wanted to have two 17 liter trashcans from Blanco (Blanco…
A simple dog poop bag holder for you to go! Hang it to your dog's leash and have it on the go. When you want to replace them just simply twist the lid to the side and pop it open. It even has a guarding hole for you to put the bag in. I…
Modular trash can for vase mode. The trash cans slide right together. PRINT SETTINGS: Layer Height: 0.2 or less (for overhangs) Cooling: 100% (for overhangs) Supports: No (optional) Adhesion: Brim (the large bottom will certainly warp on…
Modeled up a small Trashcan for my Bathroom. it got a Volume of around 2,7L. Dogpoop bags fit perfectly in it. The Outside measurements are 182mmx102mmx172mm Lid is designed to get bolted together with two M3x40 Blots and Nuts.
Ikea variera trash can wall mount for the ikea item number 402.461.04 Print it as the letter U standing on the print bed or standing on the U shaped edge with supports, 3-5 walls and 30% infill to insure being able to handle loading of…
A practical, 3D-printable organizer box designed to hang securely on desks up to 38mm thick. Perfect for holding stationery, cables, or small tools, this compact box helps declutter your workspace. Easy to print and assemble, it combines…
https://www.reddit.com/r/3Dprinting/comments/1dwvxol/medical_biohazard_trashbin_for_used_needles/ Wheels best if TPU Uses a M3 heat insert and M3x30 screw for the lid. And 2 magnets (5x3mm) to “secure” the closing lid For the biohazard…
To install, catch bottom lip, and rotate onto can lip. Should snap into place, holding bag. Print 2-4 per can, as needed. VIDEO, 1-second INSTALL: Print tips: Print as oriented. Prints with no supports needed. Print either in PETG or PLA.…
Après quelques années d'une réparation, ça m'a lâché. C'est l'attache de la pin guide de la porte. Convient aux boubelles de 287mm de diamètre hors tout. Impression: 0.2 layer, 3 walls, 3 top/bottom, 15% infill, PETG Recoller les morceaux…
Add the hinge pins into the part before placing the part into the rest of the bin, then use a pointy object to slide the pin in. When the pin is fully pushed in, there is a hole for a small screw ~5mm in length to be screwed in to prevent…
Trashcan to be mounted under desk with a hole in the desk. Desinged to be used with Coffe knockboc chute.
Box for used batteries 9V battery style Dimensions : 91x60mm, height 160mm Need 4 magnets diam.4 x 2mm Case: Layer height 0.2mm Infill 15% Model color Black then Copper Color change at 105mm Pause at 151.6mm to place the 2 magnets (4x2mm)…
After the hinge broke for my Stainless steel, round, trashcan i've created a re enforced one that is still going strong for 2 years. The hinge is best printed with: Walls: 3 Infill: 15% or 20% Extra: cut 1.55 of the top hinge part like in…
This is a desk trash bin that I have found is really useful for keeping my office desk tidy. It features a knurled design that creates a nice optical effect. Print it at 0.2mm layers in your favourite filament and enjoy a tidier desk :p
This can be used to stop your trashcan from moving back when you go to open it.
as mentioned it is a trash can. For use you need 2 14mmx4mmx2,5mm magnets. If you dont have them you can adjust the step model for your needs. Slide the magnets in the two holes. You slide the can from above onto the bolts of the left z…
What to say about it, is a trash can for the table that looks like a garbage can. I have removed the garbage can lettering from the model Printed with PETG Without support Layer height 0.2mm …………………………………………………. Was soll man dazu sagen,…
Dusty is here for you whenever you have any scraps of filament that need to be thrown away, or any other sort of small trash. He can also help you in case you need a place to keep your pen, as his hands are positioned to be able to hold…
Small flip lid trashcan, a great place to put all the trash from a desk.
Its a 3x3x24 trashcan for Gridfinity. This desktop gridfinity trashcan is designed to use those little doggy poo bags as a trash liner, and has a recess to index whatever rubber band or alternative attachment mechanism 3u down to secure…
The motor cable holder must be inserted from the back because the z rod is in the way. Lower part that clips to the frame is designed to go harder in. You must use some force and bend it a bit backwards to fit. It is designed like that…
3d printable trashcan. Max out the height of your 3d printer or max out the length and adjust the height.
You really only need 2 of them per can. To lock in place insert sideways and rotate 90 degrees.
this is a working repo trashcan,just to make it clear,you will need to assemble some of the stuff,i did it like that so you guys will have less problems with printing it and supports,only things needed are superglue or just some strong…
Gridfinity 2x2 bin for Barilla Sugo glass jar (Workbench/Desk trashcan) I've been using an old pasta sauce glass jar as my workbench trashcan for almost forever. Now it can find it's place on a neatly organised desk. Using a glass jar as…
Cat learned to open the bathroom trashcan - needed a solution to prevent him stealing the nasty stuff from it. The lock matches the popular ikea bathroom trashcan. Secured with a double-sided tape. The hinges are "made" from 1.5mm2 copper…
i had to take the cup stl down because when you print a cup there could be micro plastic inside
As one of my printers sits on top of an IKEA drawer, i wanted a small bin that holds on the drawer, but can be easily removed to empty it. If it doesn't fit your drawer, feel free to remix and make it fit. Best printed in PLA with snug…
A trash can for filament instead of a trash can for other things so they don't get together!
Here you will find a practical filament trashcan for your MINGDA Rock 3 Pro printer. It attaches to the printer with two clips that prevent it from coming into contact with the print bed during printing. Small tabs on the clips prevent…
This remix of @Malolo 's Malolo's Silica Gel / Desiccant Containers design adds a mounting hole and a reinforcement pad to the container and the cap to allow mounting this Trashcan Deodorizer to a trashcan with a bolt. Filling the…
Einfach anbringen und mit einem Schloss verschließen. Für 240l Tonnen.
-Print the fins four times -Assemble by gluing the parts together -Attach a nut as a counterweight with two zip ties
Toilet trashcan wall french cleat holder with FreeCAD file. It has 3 separate parts. Wall mounting part, the holder and the case part. No support needed. Orientation should be like in the picture. I printed in PETG. Glued with F.BS.
This is a trashcan you can mount to a vertical surface and easily remove if you need to! I made this so I can have a small trashcan under my desk, mounted to a sidewall of my drawer cabinet. The holes for the screws are 4mm in diameter so…
Small bin to toss failed small prints, brims or skirts in. Size i 200x200x100mm, scale it if it doesn't fit your buildplate.
Suzuki Logo eingefügt REMIX VON https://www.printables.com/model/500969-suzuki-vitara-2015-cupholder-trash-can
Used with another 3d printable screw to hold trashcan on side of an ikea lack. Mainly for keeping trashcan off the floor
I wanted to mount the capacitor trashcan to the wall, so I made a shelf! It is simply mounted via two stripes of double-sided tape.
Keep your workspace clean in style with this compact mini trash can featuring a smooth, self-balancing swing lid. Designed from the ground up and fully 3D-printed, this little bin adds personality and function to any desk, workshop,…
Every time you through out a sticky note, instead of walking to the trashcan, it could be on your table, no getting up!!
Keep your room or workspace less cluttered with this big trashcan! This trashcan only takes three hours to print in vase mode at 500%. Fully print in place.
A trash can modeled to fit in the center console of the Polestar 4. It has four 9mm diameter holes in the back to press fit / glue in magnets. It prints in 3 parts: Main trash can Lid bottom Lid top You can also only print the main trash…
Ein schlichter, eleganter und funktionaler quadratischer Behälter, ideal um Filamentreste sinnvoll zu verwerten. Durch die minimalistische Geometrie eignet er sich perfekt als Schreibtisch-Organizer, Stiftehalter oder zur…
I designed a print in place rotating trashcan-lid for ESN Isoclear and ESN Whey Containers, because I wanted to reuse them. I printed in Prusament PLA with 3 Perimeters and ~10% infill. You need to flip the model upside down in the…
Needed a trashcan next to my desk and decided to print one instead of purchasing one. It comes with a lid so you can insert a grocery bag for easy removal. Detailed printing instructions are supplied via a PDF document. I reccomend 3…
Have you ever wanted a trash can that actually looks like a trash can? Well now you can, with trashCan²! Great for offices, workshops, bathrooms, bedrooms, kitchens, makerspaces, you name it! Scale it to your heart’s content. As long as…
Holds back garnishes and other stuff, while letting liquid passthrough with ease. It even have a lip on the inside to make sure the droplets go directly into the waste and doesn't spill everywhere. Originally made for rectangular trashcan…
Trashcan made to fit the compartment under the centerconsole in the 2024 Ford Explorer EV. I created a lid to secure a trashbag of no paticular size in the can. Use it or don't. proberbly best to print in something fancy and somewhat…
Throwing your recyclables into the same trash can in your office because you are too lazy to take them elsewhere? Fear no longer! This is a simple basket insert for a trashcan that allows you to separate your recyclables. Suitable for…
This is Flatcan. Flatcan is a small Kitchen-Trashcan that utilizes the standard size dogpoop-bags. It is meant for your typical kitchenwaste that you find prepping your family meal, as that is often way too much for any classic 5L…
Keep your workspace clean and your desk empty with this easily removable waste bin for the Skadis system. The included bracket is optimized for easy removal and remounting of the bin. The swinging lid allows easy access. The bin was…
I have seen quite a few intricate designs with guides and rails that run to the side etc. But I have a specific tent enclosure that has limited space and is designed to stay closed to keep dust out and heat in. So, I designed this to fit…
This is a remix of the original standing model with adjusted lid tolerances for easier FDM printing. The original version had nearly zero clearance between the lid and the container, causing both parts to interfere after printing. I…
I couldn't find the lower part of the Nespresso Magimix trashcan. Print it with ASA so it will be waterproof. Fits perfect under: https://www.printables.com/model/956251-nespresso-magimix-trashcan
Replacement trash can lid for cars interior. Printed with ASA black to withstand car temps during summer. DONT PRINT IN PLA-PETG they will melt. All settings included in 3MF.
It is designed to mount the IKEA HÖLASS trash can inside a cabinet door. It can be mounted with 2 screws. It consists of 2 parts. One part is for mounting the trash can to the door, and the other part is for securing the trash bag.
i wanted to make a trashcan for failed prints and supports that i was able to mount to the side of a cabinet or a wall. You can choose between a 15cm tall version or a 7,5mm tall version and eitehr mounting with doublesided tape or bolts…
🗑 Ready to level up your workspace? This custom G-code prints the perfect bowl-shaped trash can or multi-purpose holder! I used PLA for a crisp, clean finish, but PETG is totally doable—just dial in that extrusion temperature before you…
This is a replacement pedal cover for my Brabantia trashcam Print it upside-down Either glue it to the metal plate, or melt the plastic pin with a soldering iron from the bottom Print Settings Printer Brand: Creality Printer: Ender 3 Pro…
for the hinge i used a 1mm welding rod. And for the tyres i used 1.75mm filament Category: Models
I shrunk the original design in order to create a diameter of 8.5 cm instead of the original 11.4 cm of the cylinder. I scaled all the pieces in Tinkercad by 74.56% Since the cylinder was going to be a long print, I also did a vase mode…
probably wont fit most trashcans. We dont use it anymore, photos are kinda dirty, sorry
I had a trashcan that I really liked but due to humidity the bottom was becoming slightly rusted and was leaving marks on the floor. So I designed and printed this base to fit on the bottom. It's a simple 17cm x 17cm square with 1cm sides…
Symbol to go on trash bins for Earthwise Club designed in SketchUp. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator (5th Generation) Rafts: Yes Supports: No Resolution: n/a Infill: 10% Category: Signs & Logos
This Desk-Trashcan is modelled after the Public Trashcans of Vienna. It is in the Scale of 1:5. I used this as a reference: https://poly.cam/capture/fb7abc53-ec15-42eb-831a-91294c7b7ab8 For the Version with the hinge, just align both…
I have made 2 versions, one is to put on the table, and the other is like the originals to hang on poles or stands. For the hanging version I recommend cable ties or cords to fix. As a reference I 3D scanned a Trashcan you can see it…
I've designed in Tinkercad an easy to print little Trashcan Bag Holder to mount inside my kitchen cabbinet or somewhere I have a trashcan. So I can easily swap the bag. Kurz in Tinkercad einen Mülleimerbeutel-Halter gebastelt. Zur Montage…
I don't have a way of storing my dead batteries other than a plastic bag which is an eyesore to look at and manage. Also we don't have any dead-battery pick up function where I live, but I'm able to store it and deliver my used up/dead…
This is a small lever which attaches to the Rubbermaid 13gal step-on trashcan so that it must be moved in order for the lid to raise. This was originally designed to keep the dog from being able to get in the trash.
Filament Bag Desktop Trashcan English: Reusing is so important nowadays, so I asked myself what I can do with all the filament bags (and it feels like I have tons of the bags) I thought I'd make a table trash can out of them. So at least…
Ein Mülleimer der aus 2 Teilen besteht, der Halter an sich und der Sicherungsring für den Müllbeutel. Ich nutze ihn für die ganzen Filament-reste die sich bei vielen drucken ansammeln. Print Settings: PLA 4 Walls 4 Bottom + 4 Top Layers…
