The Garnish Trashcan Top
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds back garnishes and other stuff, while letting liquid passthrough with ease, even have a lip on the inside!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Holds back garnishes and other stuff, while letting liquid passthrough with ease. It even have a lip on the inside to make sure the droplets go directly into the waste and doesn't spill everywhere.
Originally made for rectangular trashcan in bars with measurements 28cm x 58cm x 60cm.
Printed on Prusa Core One
ST-PLA from 3D Saga
10% Infill, with 4mm brim depending on print orientation, flat surfaces might lift without.
Snug supports is recommended for 250x250mm print plate. I could not get organics to fit on the CoreOne print plate with this size print.