The Garnish Trashcan Top
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds back garnishes and other stuff, while letting liquid passthrough with ease, even have a lip on the inside!
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 28
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Holds back garnishes and other stuff, while letting liquid passthrough with ease. It even have a lip on the inside to make sure the droplets go directly into the waste and doesn't spill everywhere.
Originally made for rectangular trashcan in bars with measurements 28cm x 58cm x 60cm.
Printed on Prusa Core One
ST-PLA from 3D Saga
10% Infill, with 4mm brim depending on print orientation, flat surfaces might lift without.
Snug supports is recommended for 250x250mm print plate. I could not get organics to fit on the CoreOne print plate with this size print.