1 / 3
3x4 instax-wide Film Pack Adapter — zdjęcie 1
1 / 3

3x4 instax-wide Film Pack Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Template/Adapter that lets you use Fujifilm's instax-wide film sheets in your 3x4 (3.25x4.25) camera

Ocena
0 / 5
Polubienia
7
Pobrania
25
Wydruki
1
Wyświetlenia
842
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A have a Graflex Anniversary Speed Graphic 3x4 camera and an old film-pack holder for expensive FP-100c (and equivalent) films, which fits the 3x4 camera. The film-back holder seemed like a perfect size for the Fujifilm instax-wide film sheets, so I decided to make an adapter or template (still unsure which word fits best) so the film-pack holder could use instax-wide film.

There are 4 parts to this design in all, and I suggest printing all of them, but you may find you don't need to, depending on the specific maker/model/version of your film-pack holder. The first, and main part is the template/adapter its self. That holds the film, so is definitely needed. The other three prints/parts are spacers, in 1mm, 2mm, and 3mm thickness (respectively). I did the spacers in that way so that you could, if needed, mix-n-match whatever works best for your film-pack holder to make any spacer from. 1mm to 7mm thickness if you use all three. Again, this is dependent on your holder. Mine uses all three, so I use all four of the prints/parts offered here.

To see actual prints of my design, check out the “Makes” tab (I print basically everything I design.)

Print instructions

Printer: ANY (I used a Qidi X-one2)

Rafts: No

Supports: No

Resolution: 0.2

Infill: N/A (default is fine, infill isn't used)

Filament: ANY (I used eSun PLA+)

Notes:
This really is a simple print. One of the simplest I've done, so there isn't a lot to say.

Post-Printing
Post printing is just testing fix and making adjustments, if needed (hopefully not, mine was perfectly fine with no adjustments at all)

Tagi