Bench Puck Set

If you are working on your workbench, you need this tool to protect your bench. Doesn't matter if you are sanding, cutting, painting or do something else. This tool will help you everytime.

You can print the Puck without Support, but I prever to use some support for the small offset on the bottom to get a better surface. Put your own text over the slicer on your Puck if you want.

You should print the antislip rubber for your Puck with TPU. This is also a separate file.
Or if you have a laser, you can also cut a neopren patty with a diameter from 64mm.
After you have to glue the mat on the top and bottom on your puck.

If you have something to paint, spray or oil. You can also use the peaks for your Puck.
The peak are two pices. If you have printed each, you can click it togehther. Maybe a small point of glue will support the conection too.

For Storage you can use the created holder. You can fix it on a wall, on your french cleat system or directly on your bench if you want. But next to the workbench ;).

Test printing setup:

Holder
Printed with PETG / HF 0,4 nozzle / 0,3mm / 10% infill / 4 perimeters / no support

Puck
Printed with PETG / HF 0,4 nozzle / (variable high) up to 0,28mm (for the rounding) / 20% infill / 4 perimeters / support your choice

Anti-Slip Rubber
Printed with TPU / HF 0,4 nozzle / 0,2mm / 50% infill / 6 perimeters / no support

Peak
Printed with PETG / HF 0,4 nozzle / 0,2mm / 10% infill / 4 perimeters / no support

If you like the model, I would be happy about a like or a picture of your make :).

Happy Printing and working!