1 / 2
No Drip Spray Number Stencils
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of number stencils, designed to catch excess spray and avoid drip and stains when used multiple times
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 91
- Wydruki
- 1
- Wyświetlenia
- 575
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (26)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (50)Powiązane
If you need to spray paint large amount of numbers in batches, and you are have been annoyed by regular stencils getting drippy and stained with paint from all previous passes, then look no further.
Features
- Each stencil has a lip near the edges of the number, catching all excess spray
- Stencils are stackable for easy storage
- Optional shield can be snapped in to the stencil, allowing just the numbers to be painted, without any over-spray
- Designed for one-person operation, best for spraying on horizontal surfaces. Using it vertically should work just fine
- All models prints without any supports
- Everything also provided as step files, allowing for easy customization
- A blank base is provided, which can be easily adapted for creating stencil of anything other than a number
- Fully parametric - the size and proportion of the models can be adjusted
- All models created in onshape, the workspace can be found here
Printing instructions
- Any material should work just fine, including most basic PLA
- Tested with 0.4mm nozzle, anything bigger may be insufficient for the desired level of detail