Bosch Relaxx'x ProSilence 66 screw-on vacuum hose termination
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw-on hose termination in case the hose broke right after the handle. Simply cut off the broken section and fix it.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
The hose broke right after the handle because of the same area being stressed all the time while rotating the hose. This print improves on that because of the longer inner part that strengthens the hose over the wear point of the handle.
For printing I only used support at the bottom part, not at the threads. These printed flawlessly without support.
Cut off the broken part of the hose (see image) and screw on the print – as far as you can make it (for me it did not go all the way to the end of the threads). It will make a friction fit and require no glue.