1 / 4
Jessem Rout-r-lift dust cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dust cover for the snugger button screw space
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 389
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (26)Powiązane
These are a simple tight fitting dust covers for the space where the snugger button screw is. I find that it collects dust, so i designed this little cover.
There is a notch in the design if you ever need to take it out you can use a screwdriver to do that.
I printed this in ABS which shrinks a tad bit, so please print one first, with the filament of your choice & scale it up or down in the slicer to make it fit so you have to tap it in. Then print 2 and cover them dust holes.
