Suporte de Cabo 3 em 1 da ENDER 3 V3 SE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Suporte composto com Suporte de Cabo, Mudança para 90º e Sensor de Fim de Filamento para Ender 3 V3 SE.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Meu suporte do cabo da cabeça de impressão, aquele com os insertes metálicos quebrou e não achei de jeito nenhum o modelo, o jeito foi improvisar com a junção de alguns modelos que encontrei. Juntei tudo em uma peça só, espero que ajude à outros que estejam passado pelo mesmo problema ou só queiram um upgrade na impressora.
-Necessário imprimir em material resistente (PETG ou ABS) eu imprimi em PETG e substitui os parafusos por dois um pouco maiores.
-Usei Bico de 0.4 com camada de 0.20, suportes simples, 4 filetes nas paredes e preenchimento de 50%.
My print head cable support, the one with the metal inserts, broke, and I couldn't find the model anywhere. The solution was to improvise by combining a few models I found. I merged everything into a single piece, hoping it would help others facing the same problem or those simply looking for an upgrade for their printer.
It is necessary to print in durable material (PETG or ABS). I printed it in PETG and replaced the screws with two slightly larger ones.
I used a 0.4mm nozzle with a 0.20mm layer height, simple supports, 4 wall perimeters, and 50% infill.
