Mainframe z16 - 5 part model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
3,38 € – 4,13 € netto (bez VAT)
Dla pliku: Part 5 Lid_0.6n_0.32mm_PLA_MK3.5_1h53m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 3,75 € netto (środek widełek).
- Masa podana przez autora
- 86 g
- Czas druku podany przez autora
- 1,88 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Mainframe z16 - 5 part model
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 124
- Wydruki
- 2
- Wyświetlenia
- 984
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A remix of a Mainframe z16 model in Fashion scale/Barbie 1:6 size with scaling at 327.84%.
Size (HxWxD) approx. 35,6cm x 11,4cm x 22,2cm
Remix differences
- The model is cut into 4 pieces with assembly joints for M3 threaded inserts
- The model has a sliding lid (part 5) so the design can be used for storage
- Fixed the two huge overhangs on the inner sides at the bottom
Add-ons
- The z16 logo is found here:
https://www.printables.com/model/1162202-mainframe-z16-logo - The IBM logo is found here:
https://www.printables.com/model/1162300-mainframe-z16-ibm-logo-plate
🚨 Important info before you take on this model 🚨
Make sure your printers are finely tuned and vibration free.
I recommend placing the printers on 4mm bitumen/resonance plates.
I recommend using glue stick at all times for this print.
I can recommend Elmer's disappearing purple glue sticks.
Tools for assembly
12x M3x5 Stainless Steel Hex Socket Bolts
12x M3 Threaded Inserts Short
Soldering iron with M3 Threaded Insert tip
3mm drill for brim removal in the 12 holes
Exacto knife or similar for trimming the brims at the inner edges
Tamiya ABS Glue or similar for the logos
Lots of coffee ☕and patience😉
Filament used
Prusament PLA Galaxy Black
| Part | Scale | Filament used |
| 1 Bottom | 327.84 % | 352 g |
| 2 Lower Middle | 327.84 % | 269 g |
| 3 Upper Middle | 327.84 % | 269 g |
| 4 Top | 327.84 % | 286 g |
| 5 Lid | 329.50 % | 87 g |
| Total | approx. 1263 g |
Print settings
Nozzle size 0.6
Layer height 0.32 Structural
Infill Grid 20%
Skirt and brim
Brim type > Inner brim only
Brim width > 50mm
Note: you might get away with a brim of 30mm and save approx. 4 minutes on the part
Advanced
Slicing > Elephant foot compensation: 0.5mm
Build plate
Parts 1 (bottom) and 5 (lid): Textured Steel Sheet
Parts 2, 3, and 4: Smooth PEI Steel Sheet
Support my work
Like this model? Donate at https://paypal.me/hjembaek
🚨Disclaimer: 🚨
This design is a remix of IBM's original z16 model, which is publicly available for personal use.
IBM retains all intellectual property rights to the original design and logo.
This remix includes modifications and additional features that are not part of the original design.
Non-Commercial Use Only:
This model is provided under a Creative Commons Attribution-NonCommercial-NoDerivatives (CC BY-NC-ND) license. It may only be used for personal, non-commercial purposes. Commercial use, including reproduction, sale, or redistribution of this model or any modifications, is strictly prohibited.
No Derivatives:
You are not allowed to modify, adapt, or remix this design in any way. The design provided is for personal use only and must not be altered or used for derivative works.
Attribution:
Proper credit must be given to IBM for the original z16 design and to me Michael Hjembæk for the modifications made in this remix.
By downloading or using this model, you agree to the terms outlined in this disclaimer.