Liczymy pasujące modele…
Bring a piece of computing history to your desk with this 3D printable STL model of an IBM Keyboard. This retro tech replica is perfect for enthusiasts looking to add a classic piece of computing nostalgia to their displays or workspace.…
I have on old IBM Thinkpad laptop with missing battery. So, I decided to design my own DIY battery for it. I didn't have an original battery so all the information I gather from the Internet and measuring the place for the battery in the…
Replacement door bracket for the IBM PS/1 front fascia. The original plastic bracket that supports the front flip-down door is prone to cracking or snapping after 30+ years. This replacement restores proper alignment and function while…
This is a model of an IBM Personal Computer XT (model 5160) that I've adapted to hold a Seagate portable hard drive. It's intended for retro PC hobbyists to store their data used with projects such as Retro-eXo, RetroArch, and LaunchBox.…
This is a battery clip for your old IBM thinkpads. I designed it for my 380XD however this will probably fit other IBM thinkpads of the same era.
This is a replacement foot for an IBM Model M. Modeled after the feet that came on my 1994 Model M. Print in TPU with solid infill and no supports.
A replica of the modelfkeyboards IBM model F 1u keycap, with a kailh stem. Fully parametrically designed. Originally created to work with the Adafruit MacroPad RP2040 , but should also work with any other kailh stems. Recommended print…
Finally I had time to update the model with a 2.8 inch TFT that looks pretty much neat. I will not delete the 2.4 inch version because it is much easier to assemble for those who don't have even basic knowledge in electronics and don't…
This is a reproduction model of a battery enclosure for the IBM ThinkPad 730T tablet computer. The inside is designed to accommodate 6 AAA-size NiMH cells and 3 terminals. If you'd like to see how I made the terminals, please watch the…
This is a reproduction of the top bezel of the IBM ThinkPad 730T Tablet computer. You can find more information in my restoration video below:
This is a reproduction of the PCMCIA door cover for the IBM ThinkPad 730T tablet computer. For video of the full restoration, please see below:
This is a reproduction of the original pen holder for the IBM ThinkPad 730T Tablet computer as well as a custom version. 730T_door_pen - this is the original model that has a lever to help eject the pen. This can be difficult to print so…
This is a 3D printable remix of “Tenkeyless keyboard palmrest” by me. I've added an extension to place in the middle, so it will be wide enough to fit an IBM Model M (49 cm). Print the 2 halves and the extension, then put the extension in…
Yes, it is a real standalone PC! All the required hardware is stuffed inside this tiny 1:4 scale monitor. You only need an external keyboard with a mouse, and it’s ready to make your retro dreams come true :) This model is much easier to…
The IBM 5140 has an incredible keyboard, but with a design flaw - there are two load-bearing screw bosses on the underside that surely were meant to have screws in them. Instead, they were heat-formed into rivets, that after 50 years are…
Changed the to match the Mainframe z16 - 5 part model The remix contains the following changes: The bottom 1mm has been cut off The scale has been changed to 59.25% to match a y-height of 10mm The scale has been changed to 93.33% to match…
A bracket to mount the parallel and game ports to the IBM PC 5150 without wasting a valuable slot. Uses two of the existing power supply bolts to hold it to the back of the chassis. The ribbon cables enter the case through a gap in the…
This model holds a USB C breakout board in the port opening of an IBM model M, over top of a M Star Classic USB Conversion board, inside an IBM Model M keyboard. I used the included USB A connector, with a short cable to connect the USB C…
i recommend v4, but v3 willk also work v1 is a bit too short for my liking (yes I know that i created it, cant I make mistakes ?)
Drive tray for IBM EXP3000 jbod based on P/N:42R4129 Printed on PLA and tested on EXP3200
Small tool designed to open the internal case clips on IBM 14L10/15L10 (Aptiva) and similar Monitors. These clips can only be reached through a small vertical opening (see image1). Just insert the tool through these openings, making sure…
ibm thinkpad 390 series hinge support you will need two m2.5x10mm and m2.5x16mm to attach the screen to the housing
I invariably ordered the wrong spool for my model of selectric, leaving me with a takeup spool that wouldn't even sit on the carriage. So I designed a similar empty spool that would work with the arbor of the selectric's other side. This…
I wanted to mount my bluescsi to an IBM Model 80 disk sled. I modified and removed the side mounts and changed the positions of the holes to match up with the disk sled to securely mount it. I posted this also on Thingiverse and gave…
Snugly mount a Mini-B breakout PCB with room to solder 90 degree header pins. Specs for the breakout PCB: Hole to hole: 16 mm PCB size: 20 mm x 18 mm approx Use 6 mm M3 bolts and nuts to fasten PCB to the print. Print Settings Printer…
This is the thread for a Libman High Power pushbroom: It goes inside the rod and the original hex sleeve goes outside. I used the original self drilling screw. Be sure to put the sleeve on the rod before installing the thread! I used…
IBM keyboard key, it's just the forward arrow, but the most important thing is the attachment, i put a .step .
You'll need to desolder the SDL connector and wire directly to the PCB. Attach Teensy to the printed piece using 3M VHB or similar double sided tape. Use something like Soarer's Converter firmware on a Teensy 2.0. You can also use an…
A (very close to) 1:1 copy of an IBM 3276 door retainer. Will probably fit any other similar beamspring doors. Category: Parts
IBM Thinkpad 600 Series Floppy Port Cover All ports have a tape underneath that secures the cover to the notebook case and allows the cover to open and close without getting lost. It is necessary to add this tape so that the cover stays…
IBM Thinkpad 600 Series Back Ports Covers All ports have a tape underneath that secures the cover to the notebook case and allows the cover to open and close without getting lost. It is necessary to add this tape so that the cover stays…
IBM Thinkpad 600 Series USB Port Cover All ports have a tape underneath that secures the cover to the notebook case and allows the cover to open and close without getting lost. It is necessary to add this tape so that the cover stays…
Model for a replacement power button in the IBM PC ValuePoint series of 486 desktop computers. The hooked legs on these seem to snap easily with age, so this model attempts to give those a bit of reinforcement. Should be printed at 100%…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com, but I’ve already done the work of converting them into ready to print STL files, including…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com, but I’ve already done the work of converting them into ready to print STL files, including…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com, but I’ve already done the work of converting them into ready to print STL files, including…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com, but I’ve already done the work of converting them into ready to print STL files, including…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com, but I’ve already done the work of converting them into ready to print STL files, including…
Customized version of https://www.thingiverse.com/thing:4753880 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=4753880 Instructions Using the following options: ring_size = 20.52 ring_width = 7.9…
The Libman Tornado Spin Mop has a weak OVAL joint in the mop handle. Gone through 3 handles with less then 10 hours of mop duty. The handles always break in the same joint. This new joint is reinforced and fixes the handle. (photo of part…
Gridfinity holder for IBM Selectric typeballs. Print in your usual settings and materials; I used PLA, you can sub PETG if your typewriter is in a really hot place for some reason. The typeball holders were modeled after the original…
Removed horizontal piece, not required for strength. This allows you to arrange the caddies on the bed to print 3-4 at a time.
Bring a piece of computing history to your desk with this 3D printable STL model of an IBM Keyboard. This retro tech replica is perfect for enthusiasts looking to add a classic piece of computing nostalgia to their displays or workspace.…
Designed for a Noctua NF-A4x10 FLX, but should fit with any 40x40x10mm fan Also check out my PCIe Bracket https://www.printables.com/model/1403187-qlogic-qle8142-ibmx-pcie-bracket
I removed the bottom tab as it was too thick for some cases I used the screws that came with the card, I don't know what size they are. The holes are 2,5mm Also check out my Fan Bracket…
Replacement Rack Rail Connectors for IBM TS4300. How to use: https://www.ibm.com/docs/en/ts4300-tape-library?topic=installing-modules-in-rack#tsk_3U_rackmounting__Mount_rail_to_block Printing only the part that you need (round or square,…
Wanted the legs on my model M to stay up at all times, but they wanted to fold down when i slid the keyboard away from me. This model stops them from folding in. It is not a perfect fit so it still wiggles a little bit, but good enough…
Remixed Selectric tab pulley with thicker walls, bigger tolerances for M3 screws and an additional lower piece that prevents the pulley axle from tilting. Recommend printing it with a high infill and preferably PETG to make it as sturdy…
The IBM 210 “bicycle” correctable ribbon cassette for the IBM Selectric III is no longer being manufactured. Ribbons for the Selectric II (and some earlier versions of the Selectric III) are, however, still in production by some…
Tall and square holed clip goes on button side, short and circle holed clips go on the opposite side Button printable separately so no AMS/MMU is required and you can remix to make other fancy designs
Place string lights in the slot, put in hook, pull down. Fits on the libman extension pole. Likely fits on other push broom handles. Print on it's side
Built this when I needed to replace a DIN cable from a busted Model F keyboard. The cable channel is made for a 5mm diameter cord, but I have included the source code (.scad) for custom sizing needs if you require something different. Can…
Made this while repairing a busted IBM Model F keyboard that was also missing its foot stands. I happen to not really enjoy standing my keyboard up and so this foot plug was created to try and adhere to the original design language while…
NLX AGP bracket to suit IBM 300PL - possibly others An NLX motherboard is a motherboard form factor, short for "New Low Profile Extended," that was created by Intel in the 1990s to replace the older LPX design. Key features include a…
A blanking plate for the round hole located on the back of the IBM 5150 PC. I put a hole in mine to mount a 3.5mm jack connected to my PicoMEM for AdLib support but the model comes with no hole. Printed with PLA using a 0.4 nozzle and…
This time, I came into possession of a T22 without the HDD and the cover. So it is only obligatory for me to come up with something just like the IBM ThinkPad 560Z External SD Card HDD Caddy . With this SD2IDE caddy, you can use an SD…
This is the model I created from the original IBM ThinkPad 560Z door piece while creating the External SD Card HDD Caddie for the machine. Maybe someone would need this one as well. I think an SLA print might turn out better than FDM.…
After designing the internal HDD caddie for the 560Z , I felt being unable to swap out the SD card is a pain that I cannot get over with. Therefore I designed this one instead! Now I can happily pop one card out and put another in to…
Enclosure for common SD2IDE and CF2IDE adapters for IBM ThinkPad 560Z. You can achieve a secure installation and stock look with this enclosure. Might work on other 560 machines or even other ThinkPad laptops. Feel free to test them out.…
Box for iBMS and Smart Shunt connection. All components are in one box, easy to install on the wall using double-sided a
Replacement motor fan for IBM Selectrics. You can download the .blend file and use the CAD Sketcher addon to modify the diameter of the hole if it doesn't fit. If you lost the metal clip for it you can use 2 M3 screws to fix the fan on…
Thick bar on the rear for added rigidity. Small cut out at the bottom right to allow installation in the bottom-most slot. Should work with any derivative of a BDT FlexStor II such as: 24-bay: IBM TS3100, Dell TL2000, Qualstar Q24,…
Just a HDD sled to use a cheap mSATA to IDE/PATA board in an IBM x40 Thinkpad. I couldn't find the exact board anymore, but can be adapted to other boards. I included the .scad files, but they are a mess. Good luck.
I got one of these storage controllers for cheap, but it didn't come with a low profile mounting bracket! This design uses two M3 screws, but clearance may need to be adjusted for different printers/filaments.
I have on old IBM Thinkpad laptop with missing battery. So, I decided to design my own DIY battery for it. I didn't have an original battery so all the information I gather from the Internet and measuring the place for the battery in the…
IBM PS/2 MCA CF Adapter Bracket and HDD LED Adapter
Replacement door bracket for the IBM PS/1 front fascia. The original plastic bracket that supports the front flip-down door is prone to cracking or snapping after 30+ years. This replacement restores proper alignment and function while…
TL,DR:* This is purely experimental. Try as I might, I can't get an acceptably fine print from my cheap FDM printer. An SLA (resin) printer should do a lot better but alas, I do not have one. Your own custom font IBM Selectric 'golfball'!…
Here is my attempt at replicating the pushbutton insert for the IBM SYSTEM/360 and System/370 mainframe computers that were popular during the mid-1960s to late 1970s. These machines had operator consoles with numerous switches, lights…
The enclosure is designed to accommodate an IBM Model 35P1976 or 35P1972 LTO-6 tape drive "full height". It will also be compatible with LTO-5 drives of the same form factor, and probably older and newer generations. These LTO drives are…
I bought an adapter but had no way to mount it (and have an easy way to remove it if needed) so I made this adapter.
This is a coupling that connects the motor and the actuating tip of an Electrolux Mixer TruFlow 400W. Don't print using PLA, it won't hold up. I printed using PETG and it turned out great.
Bring a slice of computing history to your desk with this 3D printable IBM 5150-style desk organizer ! Inspired by the original IBM Personal Computer from 1982, this fun and functional model combines retro charm with modern practicality —…
Keytop for an IBM model m keyboard with the IBM logo onto it, ideal for a super (or windows if you prefer) key The model is made to be printed with a resin printed considering the size of the key, the legend is etched 0.5 mm into the key…
Flat bottom adapter for MX switches. If you need a "flat top" variant, check out this model instead. Also only 1u keys and 1.5u (modifier keys) are supported. The Blender source is built non destructively and should be very easy to…
A collection of retro computing and gaming logo clog charms to customize your shoes with classic tech history. This pack includes 4 iconic logos: - Atari: The classic "Fuji" logo. - Commodore: The famous "C=" emblem. - IBM: The legendary…
A working single piece keycap for the IBM Model M and Model F keyboards. DISCLOSURE: Please bear in mind this isn't a one-hundred percent accurate copy of the original keycap design - but they are close. I had to make some concessions…
Replacement pinch-roller sleeves for the IBM 5183 Portable Printer, including the IBM/Lexmark 5183-010. The original rubber rollers commonly deteriorate into a sticky, grease-like residue, leaving only the bare steel shafts. When this…
This thing can be used to replace the DIMM memory fillers in an IBM Bladecenter. I made it into two parts so that the insert part with the tabs can be as strong as possible (since it is printed on its side). Simply print the shell and…
These two parts replace elements of the keyed locking latches used to retain the side panel of old IBM server racks. I bought the rack second hand without the keys and needed a solution to retain the side panels after drilling out the…
I bought a box of these chunky switches a while back and have finally found a use for them as the main power switch for my rebuilt Ender-3. Produces a very satisfying sound when flipped. It comes in two parts - the housing, and the lid.…
In addition to the commonly broken display hinges, I also had this latch break on an IBM P70 / model 8573 computer. As a result, the display would no longer stay latched closed. I measured the original part and created a rough replacement…
Allows you to get just the right height while protecting the fragile orginal feet of the keyboard. The design is made to be held by the original feel but all of the forces would be passed into the case to avoid damdge. Instructions Start…
You can find the video on the build here!
Compatible for (at least) these IBM servers: X3550 M4 X3630 M4 X3650 M4 X3850 X5 X3950 X5 Fits 2.5" HDDs and SSDs with a maximum height of 15mm. Included is a version that requires (countersunk) screws and a screw-less one that clips into…
I really like the font and texture in IBM Model M keyboards, but needed a much smaller keyboard for my home office. I had saved a set of caps from a trashed Model M and decided to print some adapters to use them on my Keychron K6. All…
WARNING! Only for real IBM enthusiasts! :D Based on the simple IBM keychain logo, added backplate for strenght, and a nice heart. The chainhole is reinforced. Print as you like, but i recommend 100% infill for pocket surviving strenght.…
This is a simply reinforced version of the original IBM keychain logo. Just added a backplate, and moved the hole to the end. Printed with 0.25 layer, 100% infill. Category: Keychains
The IBM Model M is great, but the little clips on their SDL cables tend to break. Once this happens, the cable doesn't like to stay in the keyboard. Replacement cables are really expensive! Instead, this clip slides over your connector…
5.5 mm socket for opening IBM keyboards. Tested in a SSK keyboard. Only usable with a 1/4 socket wrench. My recommenation is to print two parts at the same time, to improve the cooling on them. Tested in PLA with no infill and 5-6…
Detailed printing and assembly instructions on Instructables Update 1/3/2023. Alignment groove between pieces enlarged Display Front pieces realigned to face downward to bed. This requires a bit of support but keeps the front lip uniform…
This hook is to hang a mop above a bucket, suspended from the side of a tall cabinet in your kitchen, closet, or anywhere else you have access to the top edge of a vertical panel. It features a 7/32" hole to accept a round head screw…
Instantly boost your COBOL skills and save the department of labor by turning your Raspberry Pi 3 into a mainframe!! Show all your fellow cobalt-colleagues what you are made of by hacking directly into the mainframe from home. Do not…
