Replacement door bracket for the IBM PS/1 front fascia.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IBM PS/1 replacement door bracket restoring proper front fascia support and original function.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement door bracket for the IBM PS/1 front fascia.
The original plastic bracket that supports the front flip-down door is prone to cracking or snapping after 30+ years. This replacement restores proper alignment and function while maintaining the clean factory look of the machine.
This part is designed to:
Fit securely into the original mounting slot
Support the door in both open and closed positions
Maintain original geometry and travel
Be printed without supports
Tested on an IBM PS/1 unit with successful installation and smooth operation. Part pictured printed on a Bambu Lab X1 Carbon Printer 2022 model.
Print Settings
Material: PLA or PETG
Layer height: 0.2mm
Infill: 40–100% (higher infill recommended for durability)
No supports required
Print orientation: Flat on back for maximum strength
For long-term durability in warmer climates, PETG is recommended.
Files Included
STL (ready to print)
Why This Exists
Many IBM PS/1 systems survive with cosmetic wear but broken door hardware. Instead of leaving the fascia loose or removing the door entirely, this part allows collectors and restorers to keep the machine original and functional.
Designed with preservation in mind.