1 / 4
2.5" Hard Drive Caddy/Tray for IBM/Lenovo xSeries Servers — zdjęcie 1
1 / 4

2.5" Hard Drive Caddy/Tray for IBM/Lenovo xSeries Servers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D printable version of 44T2216 hard drive caddy for 2.5" SATA/SAS in IBM xSeries servers' hot swap bay.

Ocena
4 / 5
Polubienia
35
Pobrania
378
Wydruki
1
Wyświetlenia
3376
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

This is a 3D printable version of the 44T2216 hard drive caddy for IBM/Lenovo xSeries servers. It can hold a 2.5-inch SAS/SATA/SSD drive and fit into the server’s hot swap bay. It has four screw holes for securing the drive and a handle for easy insertion and removal. Plenty of holes in front allow for adequate air flow during operation.

The model is designed to be printed with PETG or ASA filament and has built-in, easily removable supports. You can use this model to replace a broken or missing caddy or to add more storage capacity to your server. Low-profile M3 hard drive screws are required.

I printed in PETG with 15% infill and 0.3mm variable layer height. PLA would probably not work as well as it might deform with heat and it's very brittle.

Tagi