IBM model F kailh stem keycap (parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replica of the IBM model F 1u keycap, with a kailh stem.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 84
- Wydruki
- 1
- Wyświetlenia
- 411
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
A replica of the modelfkeyboards IBM model F 1u keycap, with a kailh stem. Fully parametrically designed.
Originally created to work with the Adafruit MacroPad RP2040, but should also work with any other kailh stems.
Recommended print settings
Infill: 100%
Layer height: As low as possible (i use 0.1mm)
Ironing for all top surfaces
Supports: Optional, this model can be printed without them
Post processing
The main issue with printing keycaps like this is preventing the layer lines from being felt when the key is pressed. If this is a problem for you, you can:
Sand top surfaces (Add height to the keycap if sanding aggressively)
Vapor smooth