1 / 3
WobbleX for TR8 leadscrew anti Z wobble whole assembly unit with additional magnets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
WobbleX for TR8 leadscrew incorporating additional magnets.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 522
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (23)Powiązane
It's a compilation someone's else designs, modified to be used instead of TR8 leadscrew nut (utilizing the same nut as well). I have added additional 6x3mm magnets (I strongly suggest using the best possible grade neodymium magnets, preferably N52) to the outer parts to keep whole assembly together by magnetic force, 4mm ball bearings from abec7 bearing (608zz or skateboard wheel bearing), m3 threaded inserts and some 3x10mm dowel pins. I have printed parts with SLA resin, but 0.1mm layer on FDM should be fine as well.