GoBilda Servo PDB Case

A 3d printed case for an 8A Henge UBEC + GoBilda Power Delivery Board to allow for a switched input, as well as allow for multiple power supply inputs to output to x8 Servo motors. 

One issue I find in my robotics projects is that I'm often using different voltage power supplies, and wanted a way to change the voltage to always output 6V to my servos, regardless. As well, many of my power supplies use different connectors like barrel or XT30, so I made a multi input female end to UBEC to change any voltage input from 7-25V out to 6V. I also wanted a switch to turn the alt. power supply on/off, and this allows for such. 

Hardware used: 

• Adafruit Metro M4 Express • Servo Power Distribution Board (GoBilda) (https://www.gobilda.com/servo-power-distribution-board-8-channel/) 

• Mini Rocker Switch 

• XT30 Male to Female Connectors/Extension Cables 

• 6x AA Battery Pack OR 12V 3000 mAh NimH battery Pack 

• Henge 8A UBEC (https://nl.aliexpress.com/item/1005005635979399.html?spm=a2g0o.productlist.main.1.2304f6sLf6sLOE&algo_pvid=5b32afcd-22fc-48de-a94f-5ea0bc501ca5&algo_exp_id=5b32afcd-22fc-48de-a94f-5ea0bc501ca5-0&pdp_npi=4%40dis%21EUR%2119.10%212.18%21%21%21142.08%2116.15%21%40211b655217362595257865649efad7%2112000033835260666%21sea%21NL%210%21ABX&curPageLogUid=wE25tiXLi1YF&utparam-url=scene%3Asearch%7Cquery_from%3A) • x4 5mm m3 countersunk screws 

• x2 16mm m4 bolts