Bambu Lab A1 Camera Relocator BiQu Panda LED Strip Capable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I took my earlier remodelled Cam Relocator and made some simple) adjustments to make it fit BIQU Panda Lux LED Kit.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 58
- Wydruki
- 1
- Wyświetlenia
- 975
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
"@mlodybuk" was the originator of the cam relocator. I remodelled it, see my earlier post: https://www.printables.com/model/893909-bambu-lab-a1-adjustable-camera-relocator
Now I provided the possibility of adding the Panda LED Kit: BIQU Panda Lux LED Upgrade Kit Illuminate the Print Area – Automatic Induction Lighting with Online Switch Control for Bambu Lab A1/A1 mini 3D Printers. Available here (at least at the time my issue of this post): https://biqu.equipment/collections/for-bambu-lab-printers/products/biqu-panda-lux-led-upgrade-kit-bambu-lab-a1
As I had already first mentioned mod of cam relocation, I just needed to take the clipped parts apart, drew the plug for connecting cable to cam and org-led. Which was quite easy to reassemble. Mind that the new corpus of the cam relocator has some extension of the cam from the housing, so the BiQu Panda cover fits easy.
The cable of the Led strip was cut, mind polarity (plus and minus), so prior to cutting mark it clearly up! I added a piece of approx. 90-100mm, securely soldered and don't forget to add some shrink tube prior to soldering. Additional shink tube pieces over both soldered pairs won't hurt at all.
Check possible and best practice installation of the cable. Then I applied the LED strip under X-axis i.a.w. BiQu instructions, see photographs. Finally attach the main power cable of the LED strip to the power cord of the x-axis stepper motor. Use the two cable ties and use the adhesive strip to secure the cable start under the x-axis.
Good luck!
For your best convenience and complete overview I also add the files I already posted in my earlier post without LED-capability.
Because of the genious (mlodybuk) idea of rotating the cam the view is now unbelievable improved. I would love to have live video, but for observing spaghetti salad this is now absolutely acceptable for me.
Explore my other Printables: https://www.printables.com/de/@Tritschi