1 / 8
Replica of the roller holder for Lotus enMotion Impulse blue compact — zdjęcie 1
1 / 8

Replica of the roller holder for Lotus enMotion Impulse blue compact

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replica of the roller holder for Lotus enMotion Impulse blue compact

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
89
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This is a replica of the roller holder for Lotus enMotion Impulse blue compact.

In the company where I work, we have these paper dispensers in the toilets in some buildings. Unfortunately, the roll holders break at some point, the flexible wings eventually when the material is sufficiently tired. We have not been able to find spare parts for them anywhere on the net, only new devices to buy.

The replica is made up of three parts so that defective parts of the holder can be reprinted quickly and easily. However, six very short wood screws (about M3, approx. 10 mm) are needed to connect the three parts. The holes in the round part are set at an angle so that the screws have a little more space to grip.

In terms of design, the holder for the cardboard roll is slightly smaller (2 mm in diameter and 2 mm in depth) so that other paper rolls also fit on it.

I can recommend PETG or an equivalent flexible material as a printing material. PLA is of course also possible, but it should not be a matt PLA, as the rollers must be able to rotate easily on the round part.

Tagi