P
PrintablesRaja
Traxxas Xmaxx Impulse Pro-Loc MX43 Rings
I posted these before on thingyverse, but I dont like that site, just too slow, so as I am moving to this, thought I would share the design here too.
- Pobrania
- 571
- Polubienia
- 38
- Ocena
- 5
Wyniki wyszukiwania: impulse
Liczymy pasujące modele…
P
Printablesps915
ImpulseRC APEX Antenna Mount + GPS (M8N) + Crossfire
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…
- Pobrania
- 442
- Polubienia
- 18
- Ocena
- 0
P
PrintablesJantar
ImpulseRC Apex EVO cam mount brackets
Original design by ImpulseRC. ImpulseRC Apex EVO original sized cam mounting brackets for customization. Print in TPU with 0-20% infill with no supports. Same size as original, so suitable for O3 cam and others.
- Pobrania
- 415
- Polubienia
- 16
- Ocena
- 0
P
PrintablesBazajewicz
GoPro HERO 11 mini ImpulseRC Apex mount ANY tilt with TBS ND
HD Cam: GoPro HERO 11 mini Frame: ImpulseRC Apex Tilt: 25deg (Message me if you need some different tilt) Compatible with TBS ND filter Post your makes! Since camera isn't available yet some holes may be a little inacurate (I did my…
- Pobrania
- 405
- Polubienia
- 12
- Ocena
- 4
P
PrintablesSzymon Szpularz
ImpulseRC APEX 5 Arm Motor Guard Bando
Motor / Arm guard for APEX 5 ImpulseRC, fit with everything motors who diameter doesn't exceed 30mm (My 2207.5). They are perfect for bando. Print settings: Material - TPU Infill - 30% Walls - 3 Supports - Touching Buildplate
- Pobrania
- 383
- Polubienia
- 19
- Ocena
- 0
P
PrintablesFabio
ImpulseRc Apex Motor Guard Protector
Print in TPU file "up" and PETG file "down" The file is the same as the other one but with more space for the motor.
- Pobrania
- 359
- Polubienia
- 8
- Ocena
- 0
P
PrintablesSPRKPLG
Impossible Drive - Slim Polaroid Battery Holder for SX-70, CB-70, Impulse, 600 Cameras to shoot I-Type Film
UPDATE Sept 2023: Improved the size of the SX-70 version (others to follow soon) to allow for the newer Polaroid batteries. These are now .3mf models exported from fusion360, and may not be in the proper orientation. ---------- This is…
- Pobrania
- 347
- Polubienia
- 64
- Ocena
- 5
P
PrintablesMacNeill
ImpulseRC Apex ExpressLRS Antenna Mount
Like my other two versions (the picture shows actually the TBS SourceOne version) an antenna mount for the 2.4GHz ExpressLRS T-Antenna. The holes have a diameter of 5mm and the distance (center-center) is 24mm. Should fit on the standoffs…
- Pobrania
- 336
- Polubienia
- 19
- Ocena
- 0
P
PrintablesWill Cheyney
ImpulseRC APEX EVO DJI O4 Pro camera TPU insert
ImpulseRC APEX EVO DJI O4 Pro camera TPU insert Use the original CNC aluminum side plates with the DJI O4 Pro camera. This replacement TPU insert replaces your existing one, enabling seamless compatibility with the DJI O4 Pro camera while…
- Pobrania
- 283
- Polubienia
- 17
- Ocena
- 0
P
Printablesfpvgio
Official ImpulseRC Apex Printable Files
Official 3D printable files for the ImpulseRC Apex frame!
- Pobrania
- 271
- Polubienia
- 15
- Ocena
- 0
P
PrintablesMacNeill
ImpulseRC ApexEVO GoPro 9/10/11/12 Mount
I liked the original design because of its clean surfaces and edges. I've just tweaked it a little bit and added the base for the ApexEVO frame. !IMPORTANT!{begin} The gap between the front propellers and the mount is about 6mm. I haven't…
- Pobrania
- 245
- Polubienia
- 10
- Ocena
- 5
P
Printablesrjbulger
ImpulseRC Apex Skid with Arm protection (improved screw holes)
Default skids with added bumpers to protect the carbon somewhat. Remixed to make a couple of the screw holes larger so the button head goes all the way to the carbon, to better secure the motor. Note you will need shorter screws Print…
- Pobrania
- 243
- Polubienia
- 11
- Ocena
- 0
P
Printablesfalke398
ImpulseRC APEX EVO / DC DJI O4 Pro camera TPU insert V2
I modified Will Cheyney design to accommodate a better range of motion. there are 6 variants: 20° 25° 30° 20° -1mm 25° -1mm 30° -1mm The pictures show 25° with 0mm and -1mm offset. I also moved the camera 2mm down making it stick out…
- Pobrania
- 240
- Polubienia
- 15
- Ocena
- 5
P
PrintablesPerry - LikeThePlatypus
Impulse Ungineering Ontos O-ring Retention Breech
The Impulse Ungineering Ontos O-ring Breech is a modified breech part that uses a DASH-016 O-ring to assist with barrel retention. The O-ring adds extra friction where excess vibration from play may push the barrel out of the blaster.…
- Pobrania
- 237
- Polubienia
- 29
- Ocena
- 5
P
PrintablesSkermiebroTechTips
ImpulseRC Apex 3d prints
STL files for the injection molded pieces as well as various antenna mounts, plus a DXF file for a HD camera mount base, are available for free download under the Creative Commons license. from http://apex.impulserc.com/
- Pobrania
- 232
- Polubienia
- 14
- Ocena
- 0
P
PrintablesRealBadDad
Fortnite Impulse Grenade Light
Fortnite Impulse grenade night light. The light pipes will snap through the sphere and the node covers screw down fixing them all together, this worked well on my Prusa MK3 only requiring a little fileing to correct some of the hole…
- Pobrania
- 227
- Polubienia
- 96
- Ocena
- 5
P
PrintablesIzzyBoop
ImpulseRC Apex Walksnail Antenna Mount
Walksnail antenna mount for the apex. EDIT: Added a mount for the HD apex as well.
- Pobrania
- 219
- Polubienia
- 11
- Ocena
- 0
P
Printablessalamantos
ImpulseRC APEX Caddx Ratel 2 camera mount
This is mount for Caddx Ratel 2 onto ImpulseRC APEX frame. It requires only two m2 4-5mm screws to secure camera itself I have printed this in PLA and it fits just right
- Pobrania
- 216
- Polubienia
- 12
- Ocena
- 0
P
PrintablesDonpilkerton
ImpulseRC apex DJI air unit holder with antenna
This is a basic model used to secure the DJI air unit to the ImpulseRC Apex frame. There are two pieces the airunit holder that has the antenna mounts built in as well as the front shim that will go over the front of the AU to secure it…
- Pobrania
- 204
- Polubienia
- 7
- Ocena
- 0
P
PrintablesWill Cheyney
ImpulseRC APEX EVO DJI O4 Pro camera mount
ImpulseRC APEX EVO side plates for DJI O4 Pro camera mounting Struggling to mount the new DJI O4 Pro camera on your ImpulseRC APEX EVO? Try these custom side plates to solve the compatibility issue. Based on the original CNC aluminum…
- Pobrania
- 195
- Polubienia
- 13
- Ocena
- 0
P
Printablesmaney_3
ImpulseRC Apex DC DJI O3 Cam Mount
In my opinion, the height of the spacers was too small to accommodate the ESC and flight controller properly. So I increased the spacers by 10 mm and constructed my own bracket. I would be happy to receive comments and suggestions for…
- Pobrania
- 185
- Polubienia
- 4
- Ocena
- 0
P
PrintablesHitLuca
ImpulseRC Apex Arm Guard - easy print
Wanted an easier to print version of the original model I found on thingiverse, and since I didn't find one I just modified it by myself. This version doesn't have weird 90 degree overhangs anymore, so no supports are needed.
- Pobrania
- 185
- Polubienia
- 4
- Ocena
- 0
P
Printablesps915
ImpulseRC APEX GoPro Mount 20/25/30° (Session / Hero 5/6/7)
Print it in TPU! I recommend SainSmart TPU! Support Me If you like my free designs and want to support me and my FPV Blog: Patreon Buy me a Beer on Thingiverse ("tip designer" on the left) or simply like my Facebook Page…
- Pobrania
- 185
- Polubienia
- 14
- Ocena
- 5
P
PrintablesThatJuicyLemon
ImpulseRC Apex 5 inch Motor protections
This is a rugged motor protection for the Impulse RC Apex frame. I made this to protect my motors in bandos. Each TPU is around 8 grams. Printing tips : - Use auto orientation if your slicer supports it. It should rotate it so that the…
- Pobrania
- 185
- Polubienia
- 17
- Ocena
- 3
P
PrintablesKrhom
DJI VTX Backpack for the ImpulseRC Apex (OG) with XT60 Lock
Print out of TPU. I print the antenna holder as-is, and the VTX holder with its butt on the bed. Assembly instructions Slide the standoffs into the vtx holder before assembly Slide the vtx holder onto the frame and secure with screw…
- Pobrania
- 175
- Polubienia
- 9
- Ocena
- 5
P
PrintablesYoufu
ImpulseRC Apex EVO ELRS antenna holder
Impulse RC Apex EVO ELRS antenna holder, protects the wire antenna. Just like my other holder for the AOS3.5, bend the holder backwards and insert the ELRS antenna wires, then slowly put everything together. Print with TPU at 100% infill…
- Pobrania
- 160
- Polubienia
- 14
- Ocena
- 0
P
PrintablesDani Projects
ImpulseRC Apex Clone parts
Todas las piezas necesarias para el clone del frame chino Steel 5 pulgadas incluye dos carcasas para la GoPro hero 5\6\7, protectores de cables de motores que se deben imprimir con PLA, patas protectoras para aterrizar, protector…
- Pobrania
- 159
- Polubienia
- 14
- Ocena
- 0
P
PrintablesWill Cheyney
ImpulseRC APEX EVO DJI O4 dual antenna mount
ImpulseRC APEX EVO DJI O4 dual antenna stubby mount Looking for a secure and durable solution to mount the DJI O4 dual antennas on your ImpulseRC APEX EVO? This stubby mount keeps your antennas low profile and ensures proper placement.…
- Pobrania
- 151
- Polubienia
- 8
- Ocena
- 0
P
PrintablesRussell Smyth
Dual Walksnail Antenna Mount for ImpulseRC Apex
Mount to place two Walksnail V2 stock antennas on an ImpulseRC Apex. Mounts the same as the stock antenna mount. Also works with my GPS/USBC mount I find printing it standing on edge with antenna mounts straight up and supports on bed…
- Pobrania
- 150
- Polubienia
- 6
- Ocena
- 0
P
PrintablesLS001
Mini Impulse Turbine
This design is based on a Pelton wheel, wich uses a high velocity, low flow jet of water to spin the turbine wheel. The Pelton wheel is classified as an impulse turbine. See: Pelton wheel - Wikipedia This model uses embedded cooling…
- Pobrania
- 147
- Polubienia
- 13
- Ocena
- 0
P
PrintablesHitLuca
ImpulseRC Apex HD ELRS antenna mount
I haven't found an antenna mount that allows mounting my generic ELRS receiver to my Apex HD frame. Specifically, I'm using this receiver with the pictured antenna Just insert the hex standoffs into the printed piece, insert the antenna…
- Pobrania
- 147
- Polubienia
- 3
- Ocena
- 0
P
PrintablesHawxxer
ImpulseRC Apex SMA Antenna Mount
The model should be printed in TPU to ensure flexibility and endurance. Fits with the Vista Air Unit nicely. Use light force with a wrench to insert the the standoffs and the SMA connector. Stock 0.2mm Prusa settings with no support…
- Pobrania
- 140
- Polubienia
- 7
- Ocena
- 0
P
PrintablesKrhom
RX & Capacitor/TVS Diode Holder for the ImpulseRC Apex
Neatly park your RX and Cap between two standoffs.
- Pobrania
- 138
- Polubienia
- 7
- Ocena
- 0
P
Printablesnxp200
ImpulseRC Micro Apex 3 Whoop Guard - Standard Analog
This is just a basic whoop guard for the ImpulseRC Micro Apex 3 inch. This version is for standard analog setups as there's not much room for digital vtx to be installed. Please note this adds relatively significant weight to the drone.…
- Pobrania
- 136
- Polubienia
- 19
- Ocena
- 0
P
PrintablesPaul
Multimaterial ImpulseRC Apex 5'' GoPro Mount
Remix that allows printing the bottom part with PLA and the top part with TPU.
- Pobrania
- 132
- Polubienia
- 8
- Ocena
- 5
P
PrintablesRowanFPV
ImpulseRC Micro Apex Arm Key
This is a replacement key for the ImpulseRC Micro Apex frame. If it is in stock from ImpulseRC, you should buy it from them. But sometimes you lose your key in the field. And often ImpulseRC is out of stock. So this is a stop gap to keep…
- Pobrania
- 131
- Polubienia
- 6
- Ocena
- 0
P
PrintablesKrhom
DJI O3 + Lens-modded O4 TPU Frontend for the ImpulseRC Apex
Fits this housing: https://www.printables.com/model/1453676-dji-o4-o3-lens-mod-housing Still fits the O3 camera. Thanks to LorenzFPV for the alternate versions!
- Pobrania
- 128
- Polubienia
- 9
- Ocena
- 0
P
PrintablesMcFly
ImpulseRC APEX Finder Beeper Buzzer Mount
rear mount for finder https://de.banggood.com/Finder-YR50B-Super-Loud-Buzzer-100dB-Dual-LED-for-FPV-Racing-RC-Drone-p-1585819.html?cur_warehouse=CN&rmmds=search Category: 3D Printing
- Pobrania
- 126
- Polubienia
- 8
- Ocena
- 5
P
PrintablesMacNeill
ImpulseRC Apex5-HD ExpressLRS Antenna Mount
It should fit for the frame. Couldn't try it myself, so I hope it works. ;) There are two versions. Their only difference is the orientation of the hex stand-offs.
- Pobrania
- 123
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPieter Van Acker
ImpulseRc APEX MICRO - DJI O4 camera mount
This camera mount, printed in two parts holds the DJI 04 pro air unit camera in place. The 04 camera is too wide which causes it not too fit between the two standoffs on the front of the frame. These brackets, printed in TPU hold the…
- Pobrania
- 117
- Polubienia
- 9
- Ocena
- 0
P
PrintablesPanda.FPV
ImpulseRC Apex HD TrueRC Matchstick Mount
Since I replaced the original antennas of the Caddx Vista, I also needed a new mount. So fix measured the antenna and created the mount.
- Pobrania
- 117
- Polubienia
- 7
- Ocena
- 0
P
Printablestippfehlr
Foxeer Lollipop 4 UFL antenna mount for ImpulseRC Micro Apex Frame (without XT30 mount)
Antenna mount for the Foxeer Lollipop 4 antenna with short tube and UFL connector for the ImpulseRC Micro Apex Frame
- Pobrania
- 114
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFeistyLemur
ImpulseRC Apex - Foxeer T-rex 25 degree fixed camera mount
This is really made only for the Foxeer T-rex, however it will possibly work with other 22mm mini cameras where the length from the center of the screws to the lens is 16.5mm or less. Made for printing in TPU, no extra tolerance on the…
- Pobrania
- 108
- Polubienia
- 5
- Ocena
- 0
P
PrintablesRussell Smyth
GPS ELRS USB Mount for ImpulseRC Apex EVO
Mount for Foxeer M10Q 180, USB port for Walksnail V2 VRX, and ELRS "T" type antenna on an ImpulseRC Apex. Works with Stock VRX antenna mount or any VRX atenna mount that is 6mm tall at the standoffs. Should work with other 18x18 GPS units…
- Pobrania
- 105
- Polubienia
- 6
- Ocena
- 0
P
PrintablesHL
GP Enmotion Impulse Paper Towel Adapter
Adapts the original plunger on the GP Enmotion Impulse Automated Touchless Paper Towel Dispenser to work with cheaper rolls with a smaller inner-radius like (Scott 04142 02). The model is provided at 95% of the original roll size but this…
- Pobrania
- 101
- Polubienia
- 6
- Ocena
- 0
P
PrintablesPsynixx
ImpulseRC Apex Matek M9N-5883 GPS mount
A quick and dirty adaption of the Matek M9N-5883 holder for the 5" ImpulseRC Apex frame. Mounts the GPS out the back and at a slight angle. Use self-tapping screws or machine screws + superglue as a ‘threadlocker’. Can also put down a…
- Pobrania
- 99
- Polubienia
- 4
- Ocena
- 0
P
Printableszielandy
Impulserc micro apex 3 FPV drone battery pad
print it with TPU, much lighter than original work even better
- Pobrania
- 98
- Polubienia
- 11
- Ocena
- 5
P
Printablesexperify3d
Walksnail Antenna Dual ImpulseRC Apex
Suitable for Walksnail or DJI Dual Antennas. Designed for ImpulseRC Apex Std & HD but Mount can be flexed to work with many others. Standoff adjustable from 16mm-34mm and is 20mm tall. Access hole for Walksnail VTX updates. Super easy for…
- Pobrania
- 98
- Polubienia
- 5
- Ocena
- 0
P
PrintablesNoroNetwork
ImpulseRC Apex Vista Antena Mount (Analog APEX)
Hope it helps someone :) For ANALOG APEX Print Settings Printer Brand: Creality Printer: Ender 3 Pro (Direct drive) Rafts: No Supports: yes Resolution: 0.2 Infill: no - use 500 perimeters insted Filament: Sainsmart TPU 95A Purple…
- Pobrania
- 97
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMcFly
Impulse RC Apex VTX / ELRS Tail / GPS M10
very inspired Remix :) for Apex. RP1 Antenna and RX Mount, M10 Gps Mount and Vista or o3 antenna Category: 3D Printing
- Pobrania
- 96
- Polubienia
- 5
- Ocena
- 0
P
PrintablesVistorx
ImpulseRC Apex Micro camera mount and protection for 3" & 4" frame
This print is for TPU. Print Settings Printer Brand: Alfawise Printer: Alfawise U20 **Rafts:** No Supports: Doesn't Matter **Resolution:** 0.1 Infill: 100% **Filament:** 3DFR TPU BLACK Notes: I made tris print with only one wall to ensure…
- Pobrania
- 94
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPieter Van Acker
ImpulseRc APEX MICRO - DJI O4 PRO antenna holder
This antenna holder keeps the DJI O4 antenna's at the top of the frame. Printed in TPU this mount is press fitted over the two back standoffs. You could glue the two DJI antenna's in place but I chose to just press fit these.
- Pobrania
- 94
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMacNeill
ImpulseRC ApexDC and Apex EVO ExpressLRS AntennaMount
The hex-holes have a distance (center-to-center) of 32mm. Apex Evo Update(2023-01-05): I uploaded a new version of this design which has 30 degrees turned hex holes. (Especially for Mark and of course everyone else whose stand offs are…
- Pobrania
- 92
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMcFly
ImpulseRC Micro Apex iFlight GoPro 8 Mount
print in TPU Category: 3D Printing
- Pobrania
- 90
- Polubienia
- 5
- Ocena
- 5
P
PrintablesSaly23
ImpulseRC Apex TBS DJI O3 Mount
Its ImpulseRC Apex TBS mount for DJI Air Unit just for one side. I am still work on it …
- Pobrania
- 90
- Polubienia
- 2
- Ocena
- 0
P
Printablesenriverd
ImpulseRC Apex EVO RP1 ELRS and O3 antennas holder
Piece that holds the antennas for the DJI O3 Air Unit and the RP1 ELRS receiver and keeps them protected from being hit when crashing the drone. The piece has been designed for the ImpulseRC Apex EVO frame, but might work for any drone…
- Pobrania
- 90
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMcFly
ImpulseRC Apex iFlight GPS Matek M8Q SMA Mount
printed with filamentum TPU Category: 3D Printing
- Pobrania
- 88
- Polubienia
- 3
- Ocena
- 0
P
Printablespetauristini
ImpulseRC Micro Apex Antenna Holder
I designed a holder to mount the Walksnail Avatar VTX Antenna V2 on the Micro Apex Frame. But it should work with others
- Pobrania
- 87
- Polubienia
- 6
- Ocena
- 0
P
PrintablesDonpilkerton
ImpulseRC Apex O3 Cam plates
I can not vouch for the durability of this but we all know that is not going to be for absolute freestyle bashing. I think it is more of a solution right now for those of use that want to use the apex in its standard layout for cinematic…
- Pobrania
- 85
- Polubienia
- 4
- Ocena
- 5
P
PrintablesWill Cheyney
ImpulseRC Echo DJI O4 dual antenna stubby mount
ImpulseRC Echo DJI O4 dual antenna stubby mount Looking for a secure and durable solution to mount the DJI O4 dual antennas on your ImpulseRC Echo? This stubby mount keeps your antennas low profile and ensures proper placement. Design…
- Pobrania
- 82
- Polubienia
- 4
- Ocena
- 0
P
PrintablesniZmo
ImpulseRC Apex GoPro Mount
A GoPro mount tailored to the ImpulseRC Apex, with a stubby knob to clear bent props. The optional bottom lock is to keep the mount to your top plate as well as added support in the middle of the mount. Use a M2 bolt up to 8mm long. F3d…
- Pobrania
- 81
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPaul
Impulse RC Apex 5'' HDZero Freestyle VTX v1 Antenna Mount
Simple mount for the Impulse RC Apex 5'' Frame when using a HDZero Freestyle VTX v1 and an 85mm antenna.
- Pobrania
- 81
- Polubienia
- 2
- Ocena
- 0
P
PrintablesThatJuicyLemon
ImpulseRC Apex 5 inch Lipo protection
This is a sturdy lipo protection for your bando sessions.
- Pobrania
- 80
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPhilPhil
ImpulseRC Micro Apex ELRS-Antennaholder (Lightversion / Sturdyversion)
I love to make useful 3D Desgins, and i love Coffee: Buy me a Coffee: https://www.buymeacoffee.com/phitscho Or Twint me something over 078 713 68 61 THANKS! ImpulseRC ApexMicro ELRS-Antennaholder for 2.4G Radiomaster-Antennas How to Print…
- Pobrania
- 78
- Polubienia
- 7
- Ocena
- 0
P
Printablesprint-all-the-things
ImpulseRC Micro Apex 4" buzzer and camera mounts
Camera mount for the Insta360 SMO 4K fitting on an ImpulseRC Micro Apex and a tail mount for a buzzer (use heat shrink to attach).
- Pobrania
- 71
- Polubienia
- 4
- Ocena
- 0
P
Printablesbossgun5050
Impulse(12713) and Gigabots(19857) Odometery
This is my teams own custom Odometry that I designed to fit our robot perfectly, so I included the step file so you can edit it to fit your robot should you wish to do so. I 3d printed these but if y'all want to laser cut it that's also…
- Pobrania
- 70
- Polubienia
- 5
- Ocena
- 0
P
PrintablesIzzyBoop
ImpulseRC Apex Evo Gopro 9 10 11 12 Half Mount
Gopro half mount for the Apex Evo top plate. Fits Gopro 9, 10, 11, and 12.
- Pobrania
- 70
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBrett Crouch
ImpulseRC Echo Arm Skid
I used PLA filament, 100% infill and printed the part bottom side up with full supports due to the "alignment nub". I used 8mm mounting for 2207 motors & M3x10 bolts.
- Pobrania
- 68
- Polubienia
- 2
- Ocena
- 0
P
Printablesrjbulger
ImpulseRC Apex DJI MMCX Antenna Mount
Modified the official SMA mount to hold the DJI MMCX antenna. Other designs were a bit tight with the cable fit so these tubes are a bit longer. Also the bottom antenna on other designs dipped below the bottom plate causing the quad to…
- Pobrania
- 68
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDLQFPV
RunCam 5 Gyroflow ImpulseRC Apex Mount 25 degrees
HD mount made for the Runcam 5 camera and the impulseRC APex frame. Has a slot for ND filter. You do need to use supports. best printed on the side. Print in TPU.
- Pobrania
- 67
- Polubienia
- 3
- Ocena
- 0
P
Printablesnxp200
ImpulseRC Micro Apex 3 Whoop Guard - For Switchblock
This is just a basic whoop guard for the ImpulseRC Micro Apex 3 inch. This was originally intended to be used with the Switchblock which mounted the VTX and camera above the frame. If you're looking for the model that suits a standard…
- Pobrania
- 66
- Polubienia
- 11
- Ocena
- 0
P
PrintablesMiguel Herrmann
DJI and Immortal-T mount for ImpulseRC Apex HD
This is a DJI air-unit and TBS Immortal-T mount for a ImpulseRC Apex HD. No glue is needed. There is space underneath the air-unit for the air-unit cable and the Immortal-T cable. There are also still space for a nice battery strap. The…
- Pobrania
- 64
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMcFly
ImpulseRC APEX BN-180 GPS, Caddx Antenne and Immortal t mount backpack
Little backpack for impulse-rc apex for crossfire gps and caddx vista antenna no support needed tpu 100% infill if you like this give me a sub on IG or YT https://www.instagram.com/martymcfly_fpv…
- Pobrania
- 64
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMacNeill
ImpulseRC ApexEVO GoPro 9/10/11/12 Mount LIGHT
There are two versions. The only difference between them is the extra cut-out for the recording-light above the front screen of the GoPro. Check that there is enough clearence between the camera body and the front propellers!
- Pobrania
- 64
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSupaHorse
Impulse 200 RGB Encoder Knob
Impulse 200 RGB Encoder Knob: Try use translucent filament on the first layer of the print to allow the light to shine thru easier. If you do not have any translucent filament you can use a normal filament, it should still work as well.…
- Pobrania
- 61
- Polubienia
- 27
- Ocena
- 5
P
PrintablesFrancis
Arm Motor Bumper for ImpulseRC APEX
Here's a simple arm and motor bumper I made some time ago, wasn't happy with how others protected the motor and also I wanted something that can withstand “hard landings” and give some skid protection from below. Works great in my…
- Pobrania
- 57
- Polubienia
- 1
- Ocena
- 0
P
Printablesdylan welch
ImpulseRC Apex HD DC DJI 03 camera mount
Print the protective cage out of PETG or ABS. 2 versions available. one for m3 heat set inserts with 4mm holes and one for direct screwing (for the lunatics) with m3 holes. Print the gummies out of TPU. one for each side. no mirroring…
- Pobrania
- 57
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPhilPhil
ImpulseRC Micro Apex 19mm Camholder
I love to make useful 3D Desgins, and i love Coffee: Buy me a Coffee: https://www.buymeacoffee.com/phitscho Or Twint me something over 078 713 68 61 THANKS! ImpulseRC Apex Micro 19mm Camholderextension Advantsges No props in view with 5"…
- Pobrania
- 56
- Polubienia
- 4
- Ocena
- 0
P
PrintablesPaul
Impulse RC Apex 5'' HDZero Micro V2 Cam Mount 25deg
Beefy mount to hold and protect the HDZero Micro V2 Cam in the Impulse RC Apex 5'' Frame at 25deg.
- Pobrania
- 56
- Polubienia
- 5
- Ocena
- 0
P
PrintablesHanjo
ImpulseRC Apex DJI Action 2 mount
A mount for the DJI Action 2 on the ImpulseRC Apex, including a separate ND filter slot for the TBS ND Filters and a cover for the ND Filter while in transport. NOW WITH V2!!! Adds holes in the back for easy of installation. ***NOTE**:…
- Pobrania
- 56
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTeo_211
Scarab 255 HO Impulse Wake Wall Art
Scarab 255 HO Impulse Wake Edition 2017 Wall Art Silhouette model. Adjustable size
- Pobrania
- 55
- Polubienia
- 9
- Ocena
- 5
P
PrintablesKonrad Hryniewicki
DJI Action 2 mount for impulserc apex 5" drone frame
DJI Action 2 mount for impulserc apex 5" drone frame. Print on side with minimal support. Best results with soft tpu like fiberflex 30d. You should use strap to secure camera. Mount compatible with magnetic ND filters like sunnylife.
- Pobrania
- 55
- Polubienia
- 6
- Ocena
- 0
P
PrintablesSzymon Szpularz
ImpulseRC Echo DJI Action 2 mount Bando
The DJI Action 2 mount fits perfectly and holds the camera securely even in crashes. It allows you to use the full camera FOV and easily switch between 16:9 and 9:16 by physically rotating the camera in the mount. Print settings: Material…
- Pobrania
- 54
- Polubienia
- 3
- Ocena
- 0
P
PrintablesNick Danger
Impulse RC Alien RR5 Mounting
Clean up your build for Impulse RC Alien RR5. This includes: 1) Receiver tray, I designed it for FrSky X4R, but may work with others up to 22.4mm wide (could mount upside down for larger) 2) VTX tray, I designed this for TBS Unify Pro 5G8…
- Pobrania
- 54
- Polubienia
- 2
- Ocena
- 0
P
PrintablesNoroNetwork
Impulserc Apex HD M80 Pro and ELRS antena
Hope it helps someone :) Mount for ELRS antena and M80 Pro GPS from HGLRC. Print Settings Printer Brand: Creality Printer: Ender 3 Pro (Direct drive) Rafts: No Supports: yes Resolution: 0.2 Infill: no - use 500 perimeters insted Filament:…
- Pobrania
- 54
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAditya Chandra
GoPro mount 24mmx40mm holes ImpulseRC Apex
Attach a gopro mount to the ImpulseRC apex using the tripod mount.
- Pobrania
- 54
- Polubienia
- 7
- Ocena
- 0
P
PrintablesOnewheeld25
Impulserc Apex Evo/DC
Fits Both the standard Apex evo as well as the DC
- Pobrania
- 53
- Polubienia
- 3
- Ocena
- 0
P
PrintablesOnewheeld25
ImpulseRC Apex Evo - Gemini Dual/Cross Band - 04 air unit - XT60 - Mount
I bought an overkill receiver and decided to find away to add it all onto my Apex Exo DC it will also fit the standard Apex Evo or most quads with 32mm rear standoffs. To Print you only need supports on the very bottom, everything else…
- Pobrania
- 53
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJames Wood
ImpulseRC Apex Tracer Antenna Mount
A vertical mount for the Tracer antenna on an ImpulseRC Apex drone. Needs one small cable tie/zip tie.
- Pobrania
- 52
- Polubienia
- 1
- Ocena
- 0
P
Printablesps915
ImpulseRC Alien Antenna Mount + GPS (M8N) + Crossfire
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…
- Pobrania
- 52
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSzymon Szpularz
ImpulseRC Echo Immortal-T Crossfire antenna mount
The Crossfire antenna mount is designed to fit the ImpulseRC Echo without the need for glue or additional parts. Print settings: Material - TPU Infill - 30% Walls - 3 Supports - None
- Pobrania
- 51
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDonpilkerton
ImpulseRC Apex(standard) Vista antenna and TBS tracer mount
This is a mount I made for the apex. It holds a vista antenna, rush cherry, or foxeer lollipop and a tbs tracer antenna.
- Pobrania
- 51
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMechAvis
Impulserc Apex 5 arm and motor guard
I really liked the original design. Made a remix with the ability to fix the arm protection.
- Pobrania
- 50
- Polubienia
- 1
- Ocena
- 0
P
PrintablesHalcón Designs
REMIX: ImpulseRC APEX GoPro HERO 6/7 Mount 20 Degrees
A remix of fpvtobi's "ImpulseRC APEX GoPro HERO 6/7 Mount" ( https://www.thingiverse.com/thing:4113660 ) design with the camera angle reduced to 20 degrees. gcode provided for MK3S
- Pobrania
- 45
- Polubienia
- 2
- Ocena
- 0
P
PrintablesArturo Garza
DJI O4 Camera Monut for ImpulseRC MicroApex 3
DJI O4 Camera Mount for ImpulseRC MicroApex 3 fixed at 10° because more that that and it don't fit M2.5 Heatset Inserts
- Pobrania
- 43
- Polubienia
- 6
- Ocena
- 0
P
PrintablesOnewheeld25
ImpulseRC Apex Apex EVO Apec evo DC 04 air unit Elrs Gemini 2.4
one of the 2.4 antenna needs to be pushed in from inside the mount (from the back) the other needs to be bent to get into the other section. once in position, i used a small amount of epoxy glue just to keep them from moving. more than…
- Pobrania
- 42
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMiguel Herrmann
DJI, GPS and Immortal-T mount for ImpulseRC Apex HD
This is a DJI air-unit, GPS and TBS Immortal-T mount for a ImpulseRC Apex HD. It is similar to my previous version. But this version also has a GPS antenna mount for a TBS M8 GPS module and uses a set of RushFPV Cherry antennas. I have…
- Pobrania
- 42
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDimata
ImpulseRC Apex 5 EVO - TPU Parts Collection (O3 / ELRS / O4Lite)
🛠 Apex 5 HD TPU Parts Library A versatile collection of parts designed for the ImpulseRC Apex 5 Evo frame. Whether you are running a standard O3 build, a naked Flywoo O4 Lite, this pack has you covered. 📁 File List & Descriptions:…
- Pobrania
- 39
- Polubienia
- 4
- Ocena
- 0
P
PrintablesPanda.FPV
ImpulseRC Apex DC 5" Nebula Pro Mount
Einfache Halterung für eine Nebula Pro.
- Pobrania
- 39
- Polubienia
- 2
- Ocena
- 0
P
PrintablesNoroNetwork
Impulse RC Apex Gopro Hero 8 (RollCage) 9, 10 FPV Mount
Hello :) This is best mount that i build in long time. Holds Gopro perfect. But need long strap. I use HQProp 20x300 and its holding mi gopro perfect. :) Print Settings Printer Brand: Creality Printer: Ender 3 Pro (Direct drive) Rafts: No…
- Pobrania
- 38
- Polubienia
- 1
- Ocena
- 0