Impulse RC Alien RR5 Mounting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clean up your build for Impulse RC Alien RR5.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 415
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Clean up your build for Impulse RC Alien RR5. This includes:
1) Receiver tray, I designed it for FrSky X4R, but may work with others up to 22.4mm wide (could mount upside down for larger)
2) VTX tray, I designed this for TBS Unify Pro 5G8 HV - Race, but may work with others up to 23 mm wide (could mount upside down for larger). I added a horizontal bar at the back to zip tie your pigtail to for strain relief.
3) Antenna mount, Designed to work with two different pigtail connectors. my TBS came with a style that had a longer bar, but I have also used some with just a hex nut. I have test fit both types. Angle is around 50 degrees.
4) Spacers - all three items when mounted don't completely fill the stack on there own I created a quick few spacers which I think will be helpful. (I have not yet printed and tested the spacers yet so they may need some adjustment to fill out the stack correctly.
Updated: 8/10/2018
5) Per request created a merged STL that combines the VTX tray and the antenna mount. This was a quick merge of the existing objects so not a clean as a redesign but should still work (not print tested)
Print instructions
You shouldn't need supports for any of them. Even the antenna mount printed find for me without support.