1 / 5
Teenage Engineering OP-1 Field and OP-XY dual performance stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Teenage Engineering OP-1 Field and the OP-XY, together at last! Should work with decksavers attached as well.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 207
- Wydruki
- 0
- Wyświetlenia
- 1214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
I originally printed these on a Prusa i3Mk3s+ using PET-G at 30, draft mode, with 25% infill (Support cubic). You can try printing at 15 or 20 detail mode, as you like. (It's a pretty big print, so draft works fine imho.) Designed in Shapr3d.
These are meant to snap onto your synths and fit tightly. If they wear or loosen, use a bit of double sided tape. The indented holes on the bottom are for 5-8mm rubber feet, if you have them.
Rock on!