Luer Lock Keychain Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A solid keychain adapter for a Luer syringe. Requires 1 jump ring per adapter.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 192
- Wydruki
- 0
- Wyświetlenia
- 765
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter that screws into a standard luer lock syringe so you can hang syringes from a keychain or lanyard. You will need 10mm jump rings to attach these to a split ring or a carabiner.
The Short Winged model can be used to daisy chain a sterile M/F Dead End cap to the keychain. The adapter itself is NOT STERILE and cannot be made sterile due to the nature of 3D printing - you have to add single use sterile caps between your syringe and the adapter.
The plain model is multipurpose and can be used for other purposes like crafts, painting, etc.
I'm new to printing so I may just have poor printer settings, but I recommend printing these in groups of nine or more, as one of the adapters always ends up being junk. The more you print at a time, the lower your ratio of junk to useable adapters will be.