Heavy Tape Dispenser (One Hand Operation)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
12,51 € – 15,29 € netto (bez VAT)
Dla pliku: Heavy Tape dispenser_0.4n_0.2mm_PLA_MK4S_10h59m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 13,90 € netto (środek widełek).
- Masa podana przez autora
- 235 g
- Czas druku podany przez autora
- 10,98 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Heavy tape dispenser. Only one hand needed to operate. No supports, no glue, clean look. Once filled, weighs over 2.5lbs
- Ocena
- 0 / 5
- Polubienia
- 69
- Pobrania
- 215
- Wydruki
- 0
- Wyświetlenia
- 1090
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
This is a heavy tape dispenser, If you have never used one, a heavy tape dispenser allows you to pull tape from it using only one hand while the other is free to hold the thing you want to secure in place.
The dispenser is designed for tape up to 1 inch wide.
Printing
None of the parts require supports and it is a very easy model to print.
Layer height has very little importance but 0.2 or 0.15 (even better) does make it look nicer.
Highly recommend using scarf joint since the outside of the model is completely smooth and there is nowhere to hide the seam.
Printed parts needed are
- 1 dispenser body
- 1 plug
- 2 pins
- 1 spindle
The dispenser fits on the Prusa mini as well as The Bambu lab A1 mini…and obviously all other bigger printers.
Non printed parts
- Blade: The design was made for a 1/2 inch hacksaw blade. just find an old one and cut a piece to the length of the slot. If you have nothing to cut it with, it is pretty easy to brake one at the desired location with couple of pairs of pliers or with the help of a vice. Link as an example. https://www.amazon.com/Imachinist-S101224x2-Bi-Metal-Replacement-Assortment/dp/B0C19B99DW/ref=sr_1_10?crid=YBG1G8HZPJWI&dib=eyJ2IjoiMSJ9.ntwUHO4fiVdEf83x82KRDdY1lkVpcosEyFEsKc57khnZrpPPSsfsHvv2GR6s7MHQT65wIRC2_75RWAKMFkW9oDIwcGqFeqP1FDPmwtdaKEjlngCDuuAp6wu84qJcaBc0cbDLLQgZiFsMoIGLpkKHWKBquHK0ELV0thqN0cowxUY_NTyEbNknDwIpBND6QMN-GQzFhH9AuTCNBoWN1sLA458KQmxQhC59RnhrphHVKmc6hhWm9b5zgFE0VEkhdDcYX3_tDdgYtI_1hjD1UW1QpocuqxD5Sur3mMJTQtyY_2G7hRFZJS8cs29yNl1U28Tn2BGLOJYiGaZ0O293KvQAY5IJaLVXbiQlijQAY0Kz6sCf6X61UBQLAjL5ua8_O3724KAsi-paakJUAdIvfImSRBBCxaIFX0AZKE3dO8XQMwluKFjnkEauCww0Roi3y-om.mZiPlOfub9fPpNrgg9-2TGB8gUvtDfUpeA3pv9Tw4Ko&dib_tag=se&keywords=hacksaw%2Bblade&qid=1736395772&sprefix=hacksaw%2Bblade%2Caps%2C143&sr=8-10&th=1
- Rubber feet/cabinet bumpers: You will need these, or anything similar to keep the dispenser from sliding around as you pull the tape. Link for example purposes. https://www.amazon.com/Cabinet-Dampening-Adhesive-Cupboard-FATLODA/dp/B088HGQSZT/ref=sr_1_5?crid=2PNBYNYUAOFTG&dib=eyJ2IjoiMSJ9.mKcM36cBE-ms34Cts5kty_rDqC58EUi1i530ngMYholi1RuTLIpCRJUUQKnAc6_BXckRI22Uz-bnnGps4NVlKHDg-gl3EUe1C3c9lyMui1TFO9bSp_VO5O3sSUFc17hOLPKqlzcu9pFZIyrQEB-9vtL0bGcn8BzD3z1TxE3FNCCnhsqtHK-1f0CLipJptsH8Mb8vZU6Gr1QoXpyZDhOOQuHqa7GYQDM2qQLGoc4u38ijcaB4QSm3BrAqnN8QOG7ChQVj3FbI2oSldXivtdlF5LyRvYnyOsy6bCIBF_nKsS8YnM0LwAibvY69L7rjoYnag3pcMv_lXADowyqp5e4SdgkZ1KU1KucUpGpmb9XEbprGSeT6OO57c7RWfBDyvMkyPOa696l2kj75FrTi5GLWxJN1IENGUoWzuLexHs2v_l7VBB_L8tON5aR4LNbzkKjF.De73fzNl4x0dtKuRuDxTksQW3a4uzTtyHjyeiDbhkNQ&dib_tag=se&keywords=cabinet+bumpers&qid=1736395294&sprefix=cabinet+b%2Caps%2C110&sr=8-5
- Something to fill it with: You will need something to fill it with. Dry sand works great but anything will do, the heavier the better. Make sure you get as much as you can in. Hold the dispenser at different angles and tap it lightly as you fill it to pack it down.
Assembly
No glue or anything special required.
- Fill the body.
- Screw on the plug.
- Cut and insert your blade.
- Stick on your rubber feet or anti-slip surface of choice on the bottom.
- Insert the pins in the spindle
And you're done !
Enjoy!