Heavy Tape Dispenser (One Hand Operation)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€12.51 – €15.29 net (excluding VAT)
For file: Heavy Tape dispenser_0.4n_0.2mm_PLA_MK4S_10h59m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €13.90 excluding VAT (range midpoint).
- Weight reported by the author
- 235 g
- Print time reported by the author
- 10.98 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Heavy tape dispenser. Only one hand needed to operate. No supports, no glue, clean look. Once filled, weighs over 2.5lbs
- Rating
- 0 / 5
- Likes
- 69
- Downloads
- 215
- Makes
- 0
- Views
- 1,093
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
This is a heavy tape dispenser, If you have never used one, a heavy tape dispenser allows you to pull tape from it using only one hand while the other is free to hold the thing you want to secure in place.
The dispenser is designed for tape up to 1 inch wide.
Printing
None of the parts require supports and it is a very easy model to print.
Layer height has very little importance but 0.2 or 0.15 (even better) does make it look nicer.
Highly recommend using scarf joint since the outside of the model is completely smooth and there is nowhere to hide the seam.
Printed parts needed are
- 1 dispenser body
- 1 plug
- 2 pins
- 1 spindle
The dispenser fits on the Prusa mini as well as The Bambu lab A1 mini…and obviously all other bigger printers.
Non printed parts
- Blade: The design was made for a 1/2 inch hacksaw blade. just find an old one and cut a piece to the length of the slot. If you have nothing to cut it with, it is pretty easy to brake one at the desired location with couple of pairs of pliers or with the help of a vice. Link as an example. https://www.amazon.com/Imachinist-S101224x2-Bi-Metal-Replacement-Assortment/dp/B0C19B99DW/ref=sr_1_10?crid=YBG1G8HZPJWI&dib=eyJ2IjoiMSJ9.ntwUHO4fiVdEf83x82KRDdY1lkVpcosEyFEsKc57khnZrpPPSsfsHvv2GR6s7MHQT65wIRC2_75RWAKMFkW9oDIwcGqFeqP1FDPmwtdaKEjlngCDuuAp6wu84qJcaBc0cbDLLQgZiFsMoIGLpkKHWKBquHK0ELV0thqN0cowxUY_NTyEbNknDwIpBND6QMN-GQzFhH9AuTCNBoWN1sLA458KQmxQhC59RnhrphHVKmc6hhWm9b5zgFE0VEkhdDcYX3_tDdgYtI_1hjD1UW1QpocuqxD5Sur3mMJTQtyY_2G7hRFZJS8cs29yNl1U28Tn2BGLOJYiGaZ0O293KvQAY5IJaLVXbiQlijQAY0Kz6sCf6X61UBQLAjL5ua8_O3724KAsi-paakJUAdIvfImSRBBCxaIFX0AZKE3dO8XQMwluKFjnkEauCww0Roi3y-om.mZiPlOfub9fPpNrgg9-2TGB8gUvtDfUpeA3pv9Tw4Ko&dib_tag=se&keywords=hacksaw%2Bblade&qid=1736395772&sprefix=hacksaw%2Bblade%2Caps%2C143&sr=8-10&th=1
- Rubber feet/cabinet bumpers: You will need these, or anything similar to keep the dispenser from sliding around as you pull the tape. Link for example purposes. https://www.amazon.com/Cabinet-Dampening-Adhesive-Cupboard-FATLODA/dp/B088HGQSZT/ref=sr_1_5?crid=2PNBYNYUAOFTG&dib=eyJ2IjoiMSJ9.mKcM36cBE-ms34Cts5kty_rDqC58EUi1i530ngMYholi1RuTLIpCRJUUQKnAc6_BXckRI22Uz-bnnGps4NVlKHDg-gl3EUe1C3c9lyMui1TFO9bSp_VO5O3sSUFc17hOLPKqlzcu9pFZIyrQEB-9vtL0bGcn8BzD3z1TxE3FNCCnhsqtHK-1f0CLipJptsH8Mb8vZU6Gr1QoXpyZDhOOQuHqa7GYQDM2qQLGoc4u38ijcaB4QSm3BrAqnN8QOG7ChQVj3FbI2oSldXivtdlF5LyRvYnyOsy6bCIBF_nKsS8YnM0LwAibvY69L7rjoYnag3pcMv_lXADowyqp5e4SdgkZ1KU1KucUpGpmb9XEbprGSeT6OO57c7RWfBDyvMkyPOa696l2kj75FrTi5GLWxJN1IENGUoWzuLexHs2v_l7VBB_L8tON5aR4LNbzkKjF.De73fzNl4x0dtKuRuDxTksQW3a4uzTtyHjyeiDbhkNQ&dib_tag=se&keywords=cabinet+bumpers&qid=1736395294&sprefix=cabinet+b%2Caps%2C110&sr=8-5
- Something to fill it with: You will need something to fill it with. Dry sand works great but anything will do, the heavier the better. Make sure you get as much as you can in. Hold the dispenser at different angles and tap it lightly as you fill it to pack it down.
Assembly
No glue or anything special required.
- Fill the body.
- Screw on the plug.
- Cut and insert your blade.
- Stick on your rubber feet or anti-slip surface of choice on the bottom.
- Insert the pins in the spindle
And you're done !
Enjoy!