Tiny Ball Joint and Nut For Pressed Inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by another model (link in description), this is a ball joint and nut that goes with the receiver hitch.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I love the design by alobal (blue parts in pictures for comparison) but I think I overtightened the assembly as the 3d printed threads eventually stripped. So, I created a similar design (Stainless Steel parts in pictures) for heat pressed inserts. The threaded insert is pressed into the ball and the bolt is pressed into the nut. I recommend using M243 thread locker (or the likes) to ensure it stays place. I've run it through the car wash many times now without any issues.
You will, of course, need the tiny receiver from alobal's creation:
Tiny Trailer Hitch by alobal | Download free STL model | Printables.com
Links to Hardware I used:
US Amazon Link to Threaded Inserts
US Amazon Link to Thread Locker