1 / 4
Prusa SD card holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Practicing my modeling skills. SD cards snaps very nicely into place but are still removable if desired.
- Ocena
- 4,667 / 5
- Polubienia
- 18
- Pobrania
- 110
- Wydruki
- 3
- Wyświetlenia
- 996
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 3) (Komentarze: 6)Remiksy (1)Kolekcje (28)Powiązane
SD card holder that adds a little Prusa flair. I recommend that you print this on either end, but not laying down. also works fine with micro SD to SD adapters!
Update 1/7/2022: I have tightened up the opening a bit on all models. There is little to no wiggle room once the SD card is inserted now. The SD card is still removable with a bit of force, but will likely never come out with normal use.