1 / 4
YTSIO anchor windlass for RC boats updated MK1.1 — zdjęcie 1
1 / 4

YTSIO anchor windlass for RC boats updated MK1.1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This windlass mimics the behavior of a "real" one, including free fall of the anchor and smoothly retrieving it.

Ocena
0 / 5
Polubienia
15
Pobrania
82
Wydruki
4
Wyświetlenia
483
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

We sell assembled and tested units, please contact us : [email protected] or visit our website/webshop: http://www.ytsio.nl

UPDATED VERSION MK1.1

  • Adjusted LockCam for better fitting the M4 Locknut
  • TPU CableGuide with flat side for better fitting added
  • Cable clip on the inside adjusted
  • Rounded up the DriveWheel and adjusted the hole for the driveshaft for better fitting
  • Added a ChainJig for chains up to 6mm wide
  • Redesigned the MotorLever for better fitting to the microswitch (no more adjustment needed tot the switch)
  • Adjusted the BodyMount, the screw for tuning the position of the microswitch is reachable without disassembling the complete winch.

 

Description

Controlling an automatic anchor windlass via a multiswitch, so it doesn't have to be through a proportional channel (though it can be if needed). This windlass mimics the behavior of a "real" one, including free fall of the anchor and smoothly retrieving it. Additionally, the anchor light can be linked to our module, automatically turning on when the anchor drops.

We keep udating our device, updates will be uploaded here. 

Our DEMO-model:

 

We sell assembled and tested units, please contact us : [email protected] or visit our website/webshop: http://www.ytsio.nl

Tagi