1 / 2
Measure tape winder case 19 mm for Bohin Tricolore — zdjęcie 1
1 / 2

Measure tape winder case 19 mm for Bohin Tricolore

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Bohin measure tape is a little bit thicker and a litte bit wider. A redesign of a perfectly working case was need.

Ocena
5 / 5
Polubienia
9
Pobrania
73
Wydruki
1
Wyświetlenia
425
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Redesign was made in Freecad. The model is very simple. Gcode supposes that two colors will be used. MMU is not needed. The same model can be printed using  PLA and PETG filaments. I used PLA Prusament “recycled” material for dev and test and the final products were printed using Prusament PETG. The PETG version is little bit more tighten, but very robust. The case was printed on Prusa MK3S.

Tagi