1 / 2
Measure tape winder case 19 mm for Bohin Tricolore — image 1
1 / 2

Measure tape winder case 19 mm for Bohin Tricolore

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The Bohin measure tape is a little bit thicker and a litte bit wider. A redesign of a perfectly working case was need.

Rating
5 / 5
Likes
9
Downloads
73
Makes
1
Views
424
Reviews
1

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

Redesign was made in Freecad. The model is very simple. Gcode supposes that two colors will be used. MMU is not needed. The same model can be printed using  PLA and PETG filaments. I used PLA Prusament “recycled” material for dev and test and the final products were printed using Prusament PETG. The PETG version is little bit more tighten, but very robust. The case was printed on Prusa MK3S.

Tags