1 / 4
Irrigation hose saddles (13, 19, 25 mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hose saddles for irrigation tubing. 3 sizes: 13, 19, 25 mm (hose tube ID).
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
Hose saddles for irrigation tubing.
3 model sizes: 13, 19, 25 mm (hose tube internal diameter (ID)). ID of saddles are larger than this to fit snuggly over the OD of the hose (see below table). Designed with a 3 mm hole on top to put a nail or screw through for mounting. See below 13,19,25 mm screen shots from the Fusion software design.
You can buy me a coffee via Paypal:
https://www.paypal.com/paypalme/moneysump
13 mm (below)

19 mm (below)

25 mm (below)

- Dimensions
| Model | Hose ID (mm) | Hose OD (mm) | Part saddle ID (mm) | Body height (nail hole depth) | Width (mm) | Suggested nail/screw length (mm) |
| 13 mm hose saddle V1 | 13 | 15 | 15 | 18.5 | 10 | 30-40 |
| 19 mm hose saddle V1 | 19 | 22 | 22 | 25.5 | 10 | 40-50 |
| 25 mm hose saddle V1 | 25 | 32 | 32 | 35.5 | 12 | 50-70 |
- Print settings:
- Print lying flat on their sides so that wall layers are in their strongest orientation
- Print with nail hole tear drop peak facing UP. It should be already facing this way when you drop it into your slicer. Change it if not.
- No supports needed (designed in Fusion with 3D printing in mind)
- 3 wall layers (or more) for strength
- 20% (or higher) concentric infill. (Would probably work fine with no infill)
- Print Material:
- Print with PETG, ASA or ABS for outdoor UV & temp resistance
- Print in PLA for a indoor, undercover and shady outdoor areas. PLA does not last out in the elements for long and will break down over time with exposure.
- Print time / material use
- Printed on a SOVOL SV08, with PLA using the default ‘SOVOL SV08 PLA' profile
| Model | ~ Print time (m:ss) | Material used per unit (g) |
| 13 mm hose saddle V1 | 5:30 | 2.78 |
| 19 mm hose saddle V1 | 6:00 | 3.86 |
| 25 mm hose saddle V1 | 8:00 | 6.39 |