F-150/Lightning MagSafe adapter and false tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
F-150 Lightning Center Console MagSafe Adapter
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 1057
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I recently purchased a 2024 F-150 Lightning Flash and I found the wireless charging to be unreliable unless your phone is completely flat. So I decided to design something better to cover it.
There are three models. One is for an iPhone with a case that has a 2mm offset for the camera bump, one with a 4mm offset for a phone with no case and a false tray that goes over the existing one to hide the cable. The hole is designed for the Apple MagSafe charger. If you need other sizes made please reach out and I can adjust for you.
There isnt much room to hide the cable so I used VHB to stick it down and then used more VHB to adhere the edges of the shelf in place.
EDIT: Forgot to mention that the tray is a 3mf and has negative volume modifiers for the cable cut outs. You can resize or adjust anyway you need for your setup.
I recommend PETG at a minimum but ABS/ASA would be better since it will be installed in a hot car.