Handguard Korsar 180 42
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handguard for installing additional equipment on the tank of the Korsar 180/42 pistol
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
We print boldly from PetG and don't worry, and that's happiness. 4 perimeters, 25 fillings, 0.4 mm nozzle, 0.2 mm layer. We print in an upright position, it is better to turn the handguard over and put it with the back side down.
To compensate for shrinkage, I recommend setting the scale to 101%
For assembly, you will need 3 brass m3 fused bushings; 2 DIN 7991 m3x8 mm screws; 1 hexagon socket screw DIN 912 m3x18.
The assembly is very simple, using a soldering iron, we install the sleeve in part 2. We put the handguard on the tank so that it extends beyond its back by 10 mm. We insert part 2 into its place. We fix everything with m3 screws.
If the handguard is still moving along the axis of the tank, then I recommend gluing double-sided tape under the back cover.