Handguard Korsar 180 42
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handguard for installing additional equipment on the tank of the Korsar 180/42 pistol
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 109
- Makes
- 0
- Views
- 452
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
We print boldly from PetG and don't worry, and that's happiness. 4 perimeters, 25 fillings, 0.4 mm nozzle, 0.2 mm layer. We print in an upright position, it is better to turn the handguard over and put it with the back side down.
To compensate for shrinkage, I recommend setting the scale to 101%
For assembly, you will need 3 brass m3 fused bushings; 2 DIN 7991 m3x8 mm screws; 1 hexagon socket screw DIN 912 m3x18.
The assembly is very simple, using a soldering iron, we install the sleeve in part 2. We put the handguard on the tank so that it extends beyond its back by 10 mm. We insert part 2 into its place. We fix everything with m3 screws.
If the handguard is still moving along the axis of the tank, then I recommend gluing double-sided tape under the back cover.